SELECT 
  cscart_product_descriptions.product_id, 
  cscart_product_descriptions.short_description, 
  IF(
    cscart_product_descriptions.short_description = '' 
    OR cscart_product_descriptions.short_description IS NULL, 
    cscart_product_descriptions.full_description, 
    ''
  ) AS full_description, 
  cscart_product_descriptions.meta_keywords, 
  cscart_product_descriptions.meta_description, 
  cscart_product_descriptions.search_words, 
  cscart_product_descriptions.promo_text, 
  cscart_product_descriptions.unit_name 
FROM 
  cscart_product_descriptions 
WHERE 
  cscart_product_descriptions.product_id IN (
    12684, 12714, 13260, 13267, 12349, 12364, 
    12259, 12504, 12524, 12379, 6843, 6840, 
    6841, 6846, 13274, 13286, 13280, 13292, 
    6962, 6966, 6967, 6965, 6963, 6952, 
    6953, 3484, 3487, 3485, 3486, 6969, 
    3434, 6947, 3424, 3911, 3422, 3910, 
    3421, 3909, 3420, 3423, 3912, 3430, 
    3429, 3437, 3436, 3438, 6959, 3425, 
    6958, 6960, 6968, 6961, 6964, 6957, 
    6956, 6954, 6955, 6948, 3914, 3913, 
    6950, 6949, 3477, 3452, 3478, 3479, 
    3453, 3491, 3488, 3497, 3495, 3489, 
    3492, 3496, 3490, 3494, 6951, 3502, 
    3503, 3493, 3498, 3428, 3433, 3432, 
    12594, 12609, 12424, 12554, 12536, 
    12546, 13127, 12464, 12624, 12654, 
    13148, 13153
  ) 
  AND cscart_product_descriptions.lang_code = 'en'

Query time 0.00233

JSON explain

{
  "query_block": {
    "select_id": 1,
    "cost_info": {
      "query_cost": "96.98"
    },
    "table": {
      "table_name": "cscart_product_descriptions",
      "access_type": "range",
      "possible_keys": [
        "PRIMARY",
        "product_id"
      ],
      "key": "PRIMARY",
      "used_key_parts": [
        "product_id",
        "lang_code"
      ],
      "key_length": "9",
      "rows_examined_per_scan": 96,
      "rows_produced_per_join": 96,
      "filtered": "100.00",
      "index_condition": "((`test2_gaseus`.`cscart_product_descriptions`.`product_id` in (12684,12714,13260,13267,12349,12364,12259,12504,12524,12379,6843,6840,6841,6846,13274,13286,13280,13292,6962,6966,6967,6965,6963,6952,6953,3484,3487,3485,3486,6969,3434,6947,3424,3911,3422,3910,3421,3909,3420,3423,3912,3430,3429,3437,3436,3438,6959,3425,6958,6960,6968,6961,6964,6957,6956,6954,6955,6948,3914,3913,6950,6949,3477,3452,3478,3479,3453,3491,3488,3497,3495,3489,3492,3496,3490,3494,6951,3502,3503,3493,3498,3428,3433,3432,12594,12609,12424,12554,12536,12546,13127,12464,12624,12654,13148,13153)) and (`test2_gaseus`.`cscart_product_descriptions`.`lang_code` = 'en'))",
      "cost_info": {
        "read_cost": "87.38",
        "eval_cost": "9.60",
        "prefix_cost": "96.98",
        "data_read_per_join": "438K"
      },
      "used_columns": [
        "product_id",
        "lang_code",
        "short_description",
        "full_description",
        "meta_keywords",
        "meta_description",
        "search_words",
        "promo_text",
        "unit_name"
      ]
    }
  }
}

Result

product_id short_description full_description meta_keywords meta_description search_words promo_text unit_name
3420 flexible Metall hose with two anti kink springs and anti whip cable assembled complete mounted on hose, length: 1.700 mminlet W30x2RH nut acc. to DIN 477-5, No. 59, with 90° angle<br />outlet M20x1,5RHk nut - 12S
3421 <p>flexible Metall hose with two anti kink springs and anti whip cable assembled complete mounted on hose, length: 1.700 mminlet W30x2RH nut acc. to DIN 477-5, No. 54 inert gas/N2, with 90° angle</p><p>outlet M20x1,5RHk nut - 12S</p>
3422 flexible Metall hose with two anti kink springs and anti whip cable assembled complete mounted on hose, length: 1.700 mminlet W24,32x1/14RHf nut acc. to DIN 477-1, No. 10, with 90° angle<br />outlet M20x1,5RHk nut - 12S
3423 flexible Metall hose with two anti kink springs and anti whip cable assembled complete mounted on hose, length: 1.700 mminlet G3/4RHf nut acc. to DIN 477-1, No. 9, with 90° angle<br />outlet M20x1,5RHk nut - 12S
3424 flexible Metall hose with two anti kink springs and anti whip cable assembled complete mounted on hose, length: 1.700 mminlet W21,8x1/14RHf nut acc. to DIN 477-1, No. 6, with 90° angle<br />outlet M20x1,5RHk nut - 12S
3425 <p>free of oil- and grease, for inert gas, fuel gas and oxygen, BAM - approved,consisting of: 2 HP double shut-off valve, 2 pressure regulator HR 20 acc. to ISO 7291, BAM - approved with membrabe and HP-contact gauges with inductive-contact, in Ruhestellung geöffnet, bei steigendem Druck schließend, incl. 2 Meter langem, 2 pol. Anschlußkabel, Farbe "blau", Abblaseventile mit montiertem Cu-Rohrbogen (270°, 10x1 mm), 1 change over block and 2 distribution blocks, each with an input with sintered filter, non-return valve, purge valve and high-pressure gauge and connection for a cylinder/bundle manifold module, completely mounted on stainless steel base plate</p><p>inlet pressure max: 300 bar<br><br>outlet pressure: 20 bar fixed<br><br>flow max: 170 Nm³/h air at 20 bar outle tpressure <br><br>inlet: 2 x M 20x1,5 RHak -12S usuage for 2x1 cylinders or bundles<br><br>outlet: G 3/4 RH x 18 mm soldered bush<br><br>inlet gauge: 0 – 400/300 bar<br><br>outlet gauge: 0 – 40/20 bar<br><br>width x height x depth: 875 x 325 x 195 mm<br><br>With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "O", additional sticker on foil: "No cost-free redemption when foil is damaged "<br><br>The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br><br>Test report and test report 2.2</p>
3428 according to drawing no. 95 100 130, with inlet pressure gauge and shut-off valve,Inlet pressure max: 12 bar<br />Outlet pressure: fixed at approx. 0.5 - 0.7 bar<br />Inlet: 7/16" x 28 NS2<br />Output: compression fitting 4 mm Ms nickel-plated<br />Inlet pressure gauge: 0 - 16 bar<br />Output pressure gauge: without (no connection available)<br />With flyer provided by Linde - Linde #43586000<br />Accessory pack: bag with 3 O-rings #11207000<br /><br />Minimum order quantity 300 pieces
3429 single stage, with safety gauges acc. to ISO 5171inlet pressure max: 60 bar<br />outlet pressure: 0 – 20 bar adjustable<br />flow max: 90 Nm³/h compressed air at 20 bar outlet pressure<br />in- and outlet: G3/8 RH female<br />inlet gauge: 0- 100/60 bar<br />outlet gauge: 0 – 40/20 bar <br />width x height x depth: 220 x 200 x 75 mm <br />with label on regulator
3430 einstufige Bauart, mit Sicherheitsmanometern nach ISO 5171, Eingangsdruck max: 40 bar<br />Ausgangsdruck: 0 – 20 bar regelbar<br />Leistung max: 90 Nm³/h Druckluft bei 20 bar Hinterdruck <br />Ein- und Ausgang: Klemmring Ms 12 mm<br />ohne Eingangsmanometer<br />Ausgangsmanometer: 0 – 40/20 bar senkrecht<br />Breite x Höhe x Tiefe: 220 x 200 x 75 mm <br />mit Typenschild auf Druckminderer, mit Werkszeugnis 2.2 Bedienungsanleitung, Etikett mit Lindenummer/öl- und fettfrei auf Folie und Karton
3432 <p>appropriate electrical equipment,marking: Ex II 1 G D [EEx ia] IIC, </p><p>to alarm and control in case of pressure drop, to connect 2 solenoid valves (230v 50Hz) and contact gauges with inductive contact, with integrated optical and acoustical signal, connection of additional external alarm possible, complete in box with potential free contact to connect contact gauges in explosive areas of group II, <br><br>box must be installed outside the explosive area, <br><br>power supply: 230V/ 50Hz</p>
3433 <p>for connecting, monitoring and switching two contact pressure gauges with inductive contacts and two solenoid valves, with internal signal display "Gas type operation OK empty" for each channel, extraction side selectable, with "Empty message hold function" (alarm must be acknowledged),Inputs: 2 x inductive contact</p><p>Output: 2 x solenoid valve 230V 50Hz<br><br>with potential-free contacts,<br><br>completely in plastic housing<br><br>Width x height x depth: 300 x 230 x 190 mm<br><br>With operating instructions, CE declaration of conformity for the electrical part, electr. Execution according to current VDE and European regulations, affixed type plate with Linde logo, glass front pane with Linde logo, Linde type designation, affixed Linde lettering, individually packed in a carton, with Linde adhesive tape</p>
3434 <p>to pre heat the gas in the high pressure area, PN 200, heating power 200 W, protection class housing: IP65, plug: IP44, supply voltage 230V/ 50 Hz,</p><p>complete with electric cable 2m and plug, inlet W21,8x1/14RHf nut, outlet W21,8x1/14RHf male</p>
3436 In-line regulator for non aggressive gasesnot to use for: He/H2/C2H2/C3H8/CH4/C2H2<br />inlet pressure: max. 40 bar<br />working pressure : 0 - 20 bar adjustable<br />membrane : PTFE coatet<br />inlet gauge: without <br />working gauge : acc. to ISO 5171, 0- 40/20 bar<br />inlet an doutlet connection: 18 mm brass two ferrule compression type fitting<br />flow : max. 90 m3/h<br />free of oil- and grease<br />width x height x depth: 220 x 200 x 75 mm <br />With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "N", additional sticker on foil: "No cost-free redemption when foil is damaged "<br />The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br />Test report and test report 2.2
3437 <p>single stage, inlet pressure: max. 40 bar</p><p>working pressure : 0 - 20 bar adjustable<br><br>diaphragm: PTFE coatet<br><br>inlet gauge: without <br><br>working gauge : acc. to ISO 5171, 0- 40/20 bar<br><br>inlet an doutlet connection: 18 mm brass two ferrule compression type fitting<br><br>flow : max. 90 m3/h compresse air at 20 bar working pressure<br><br>free of oil- and grease<br><br>width x height x depth: 220 x 200 x 75 mm <br><br>With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, additional sticker on foil: "No cost-free redemption when foil is damaged "<br><br>The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br><br>Test report and test report 2.2</p>
3438 In-line regulator, single stage,inlet pressure: max. 40 bar<br />working pressure : 0 - 20 bar adjustable<br />membrane : PTFE coatet<br />inlet gauge: without <br />working gauge : acc. to ISO 5171, 0- 40/20 bar<br />inlet an doutlet connection: 18 mm brass two ferrule compression type fitting<br />flow : max. 90 m3/h<br />free of oil- and grease<br />width x height x depth: 220 x 200 x 75 mm <br />With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "O", additional sticker on foil: "No cost-free redemption when foil is damaged "<br />The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br />Test report and test report 2.2
3452 <p>acc to DIN EN ISO 2503, class 3, single stage, with safety gauges acc. to DIN ISO 5171,</p><p>with shut off valve<br><br>inlet pressure max: 200 bar<br><br>outlet pressure: 0 - 30 Nl/min. (0 – 10 bar) adjustable<br><br>flow max: 30 Nl/min. at 10 bar outlet pressure <br><br>inlet connection: W 21,8x1/14 LH nut acc. to DIN 477-1, no. 1<br><br>outlet connection: G 3/8 LHk x 9 mm tail-piece acc. EN560<br><br>inlet gauge: 0 – 315 /200 bar<br><br>working gauge: 0 – 30 Nl/min.<br><br>width x height x depth: 210 x 190 x 75 mm<br><br>with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape</p>
3453 <p>acc to DIN EN ISO 2503, class 3, single stage, with safety gauges acc. to DIN ISO 5171,</p><p>with shut off valve<br><br>inlet pressure max: 200 bar<br><br>outlet pressure: 0 - 50 Nl/min. (0 – 10 bar) adjustable<br><br>flow max: 50 Nl/min. at 10 bar outlet pressure <br><br>inlet connection: W 21,8x1/14 LH nut acc. to DIN 477-1, no. 1<br><br>outlet connection: G 3/8 LHk x 9 mm tail-piece acc. EN560<br><br>inlet gauge: 0 – 315 /200 bar<br><br>working gauge: 0 – 50 Nl/min.<br><br>width x height x depth: 210 x 190 x 75 mm<br><br>with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape</p>
3477 acc to DIN EN ISO 2503, class 3, single stage, with safety gauges acc. to DIN ISO 5171inlet pressure max: 200 bar<br />outlet pressure: 0-10 bar<br />flow: 0 – 20 Nl/min. adjustable<br />Inlet connection: W 21,8x1/14 RH nut acc. to DIN 477-1, no. 6<br />outlet connection: G 1/4 RHk x 6 mm tailpiece acc. to EN 560<br />inlet gauge: 0 – 315/200 bar<br />outlet gauge: 0 – 20 Nl/min. double scale Ar/CO2 (0 - 10 bar)<br />width x height x depth: 210 x 230 x 75 mm <br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
3478 acc to DIN EN ISO 2503, class 3, single stage, with safety gauges acc. to DIN ISO 5171, with shut off valve,inlet pressure max: 200 bar<br />outlet pressure: 0 – 10 bar <br />flow: 0 – 30 Nl/min. adjustable<br />inlet connection: W 21,8x1/14 RH nut acc. to DIN 477-1, no. 6<br />outlet connection: G 1/4RH x 6mm tail-piece<br />inlet gauge: 0 – 315/200 bar<br />working gauge: 0 – 30 Nl/min. (0 - 10 bar)<br />width x height x depth: 210 x 190 x 75 mm<br />with Linde-Logo stamped on body, with Linde operating manual and Linde tape
3479 acc to DIN EN ISO 2503, class 3, single stage, with safety gauges acc. to DIN ISO 5171inlet pressure max: 200 bar<br />outlet pressure: 0-10 bar<br />flow: 0 – 20 Nl/min. adjustable<br />Inlet connection: W 21,8x1/14 RH nut acc. to DIN 477-1, no. 6<br />outlet connection: G 1/4 RHk x 6 mm tailpiece acc. to EN 560<br />inlet gauge: 0 – 315/200 bar<br />outlet gauge: 0 – 30 Nl/min. double scale Ar/CO2 (0 - 10 bar)<br />width x height x depth: 210 x 230 x 75 mm <br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
3484 <p>5-pack #300001 packed in PE- foil bag marked with logo ´LINDE´ and Linde-item-No.</p>
3485 <p>5-pack #300004 packed in PE- foil bag marked with logo ´LINDE´ and Linde-item-No.</p>
3486 <p>5-pack #300005 packed in PE- foil bag marked with logo ´LINDE´ and Linde-item-No.</p>
3487 <p>5-pack #300028 packed in PE- foil bag marked with logo ´LINDE´ and Linde-item-No.</p>
3488 according to ISO 2503, class 3,single stage with high-pressure compensation, with safety gauges according to ISO 5171, including shut off valveinlet pressure max.: 300 bar<br />working pressure: 0 - 10 bar adjustable <br />flow max. 48 Nm³/h compressed air at 10 bar working pressure<br />inlet connection: W 30x2 RH acc. to DIN 477-5, no. 54<br />outlet connection: G 1/4 RH x 6 mm acc. to EN 560<br />cylinder gauge 0 - 400/300 bar<br />working gauge: 0 - 16/10 bar<br />width x height x depth: 210 x 190 x 75 mm <br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
3489 acc. to ISO 2503, single stage with safety gauges acc. to EN562inlet pressure max:300 bar<br />outlet pressure: 10 - 100 bar adjustable<br />flow max:380 Nm³/h at 50 bar outlet pressure <br />inlet connection: W 30x2 RH nut acc. to DIN 477-5, no. 54<br />outlet connection: W 24,32x1/14 RH male DIN 477-1, no. 10<br />inlet gauge: 0 – 400/300 bar<br />working gauge: 0 – 160/100 bar<br />width x height x depth: 170 x 140 x 180 mm<br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
3490 acc. to ISO 2503, single stage with safety gauges acc. to ISO5171inlet pressure max: 300 bar<br />outlet pressure: 10 - 300 bar adjustable<br />flow max: 380 Nm³/h at 50 bar outlet pressure <br />inlet connection: W 30x2 RH nut acc. to DIN 477-5, no. 54<br />outlet connection: W 24,32x1/14 RH male DIN 477-1, no. 10<br />inlet gauge: 0 – 400/300 bar<br />working gauge: 0 – 315/200 bar<br />width x height x depth: 170 x 140 x 180 mm<br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
3491 acc. to ISO 2503, class3, with high pressure compensation, single stage with safety gauges acc. to DIN ISO 5171inlet pressure max:300 bar<br />outlet pressure: 0 – 10 bar adjustable<br />flow max: 48 Nm³/h at 10 bar outlet pressure<br />inlet connection: W 30x2LHk nut acc. to DIN 477-5, Nr. 57<br />outlet connection: G 3/8 LHk x 9mm tail-piece acc. to DIN EN 560<br />inlet gauge: 0 – 400 / 300 bar<br />working gauge: 0 – 16/10 bar<br />width x height x depth: 210 x 190 x 75 mm<br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
3492 acc. to ISO 2503, class 5, single stage, with high pressure compensation for constant working pressure, with safety gauges acc. to ISO 5171, with shut off valve,inlet pressure max.: 300 bar<br />outlet pressure: 0 – 20 bar adjustable<br />flow max.: 75 Nm³/h air at 10 bar working pressure<br />Inlet connection: W30x2LH nut acc. to DIN 477-5 no. 57<br />outlet connection: G 3/8 LHk x 9 mm tailpiece acc. to EN 560<br />inlet gauge: 0 - 400/300 bar<br />working gauge: 0 - 40/20 bar<br />width x height x depth: 210 x 210 x 75 mm<br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
3493 <p>acc to DIN EN ISO 2503, class 3, single stage, with safety gauges acc. to DIN ISO 5171,</p><p>with shut off valve<br><br>inlet pressure max: 200 bar<br><br>outlet pressure: 0 - 50 Nl/min. (0 – 10 bar) adjustable<br><br>flow max: 50 Nl/min. at 10 bar outlet pressure <br><br>inlet connection: W 30x2 LH nut acc. to DIN 477-5 no. 57<br><br>outlet connection: G 3/8 LHk x 9 mm tail-piece acc. EN560<br><br>inlet gauge: 0 – 400/300 bar<br><br>working gauge: 0 – 50 Nl/min.<br><br>width x height x depth: 210 x 190 x 75 mm<br><br>with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape</p>
3494 <p>acc to DIN EN ISO 2503, single stage, with high pressure compensation for a constant working pressure on falling inlet pressure with safety gauges acc. to DIN ISO 5171inlet pressure max: 200 bar</p><p>outlet pressure: 0 – 60 bar adjustable<br><br>flow max: 140 Nm³/h at 60 bar working pressure<br><br>inlet connection: W30x2 RHf nut acc. to DIN 477-5, no. 54<br><br>outlet connection: G 1/4RHak acc. to EN560<br><br>inlet gauge: 0 – 400/300 bar<br><br>working gauge: 0 – 100/60 bar<br><br>width x height x depth: 210 x 210 x 75 mm<br><br>with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape</p>
3495 acc. to ISO 2503, single stage with safety gauges acc. to ISO 5171inlet pressure max:300 bar<br />outlet pressure: 10 - 100 bar adjustable<br />flow max: 380 Nm³/h at 50 bar outlet pressure <br />inlet connection: W 30x2 RH nut acc. to DIN 477-5, no. 54<br />outlet connection: W 21,8x1/14 RH male DIN 477-1, no. 6<br />inlet gauge: 0 – 400/300 bar<br />working gauge: 0 – 160/100 bar<br />width x height x depth: 170 x 140 x 180 mm<br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
3496 acc. to ISO 2503, single stage with safety gauges acc. to EN562inlet pressure max: 300 bar<br />outlet pressure: 10 - 300 bar adjustable<br />flow max:380 Nm³/h at 50 bar outlet pressure <br />inlet connection: W 30x2 RH nut acc. to DIN 477-5, no. 54<br />outlet connection: W 21,8x1/14 RH male DIN 477-1, no. 6<br />inlet gauge: 0 – 400/300 bar<br />working gauge: 0 – 315/200 bar<br />width x height x depth: 170 x 140 x 180 mm<br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
3497 according to ISO 2503, class 3, adiabatic compression tested, single stage with high-pressure compensation, with safety gauges according to ISO 5171, including shut off valveinlet pressure max.: 300 bar<br />working pressure: 0 - 10 bar adjustable <br />flow max. 48 Nm³/h compressed air at 10 bar working pressure<br />inlet connection: W 30x2 RH acc. to DIN 477-5, no. 59<br />outlet connection: G 1/4 RH x 6 mm acc. to EN 560<br />cylinder gauge 0 - 400/300 bar<br />working gauge: 0 - 16/10 bar<br />width x height x depth: 210 x 190 x 75 mm <br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
3498 acc. to ISO 2503, single stage with safety gauges acc. to EN562inlet pressure max:300 bar<br />outlet pressure: 10 - 100 bar adjustable<br />flow max:380 Nm³/h at 50 bar outlet pressure <br />inlet connection: W 30x2 RH nut acc. to DIN 477-5, no. 59<br />outlet connection: G3/4RHf male DIN 477-1, no. 9<br />inlet gauge: 0 – 400/300 bar<br />working gauge: 0 – 160/100 bar<br />width x height x depth: 170 x 140 x 180 mm<br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
3502 <p>acc to ISO2503, single stage, with flowmeter for exact control of the flow in Nl/min, TÜV – approved following Pressure equipment Directive 97/23/EG with high pressure compensation for constant working pressure with safety gauge acc. to ISO 5171, with shut off valveinlet pressure max: 300 bar</p><p>outlet pressure: 1,5 bar pre adjusted<br><br>flow: 2 – 23 Nl/min. adjustable<br><br>inlet: W 30x2 LH nut acc. to DIN 477-5<br><br>outlet: G 3/8 LHk x 9 mm tail-piece acc. EN 560<br><br>inlet gauge: 0 – 400/300 bar<br><br>width x height x depth:: 210 x 230 x 75 mm</p>
3503 acc to DIN EN ISO 2503, class 3, single stage, with safety gauges acc. to DIN ISO 5171, with shut off valve,inlet pressure max: 300 bar<br />outlet pressure: 0 – 10 bar <br />flow: 0 – 30 Nl/min. adjustable<br />inlet connection: W 30x2 RH nut acc. to DIN 477-5, no. 54<br />outlet connection: G 1/4RH x 6mm tail-piece<br />inlet gauge: 0 – 400/300 bar<br />working gauge: 0 – 30 Nl/min. (0 - 10 bar)<br />width x height x depth: 210 x 190 x 75 mm<br />with Linde-Logo stamped on body, with Linde operating manual and Linde tape
3909 flexible Metall hose with two anti kink springs and anti whip cable assembled complete mounted on hose, length: 1.000 mminlet W30x2RH nut acc. to DIN 477-5, No. 59, with 90° angle<br />outlet M20x1,5RHk nut - 12S
3910 <p>flexible Metall hose with two anti kink springs and anti whip cable assembled complete mounted on hose, length: 1.000 mminlet W30x2RH nut acc. to DIN 477-5, No. 54 inert gas/N2, with 90° angle</p><p>outlet M20x1,5RHk nut - 12S</p>
3911 flexible Metall hose with two anti kink springs and anti whip cable assembled complete mounted on hose, length: 1.000 mminlet W24,32x1/14RHf nut acc. to DIN 477-1, No. 10, with 90° angle<br />outlet M20x1,5RHk nut - 12S
3912 flexible Metall hose with two anti kink springs and anti whip cable assembled complete mounted on hose, length: 1.000 mminlet G3/4RHf nut acc. to DIN 477-1, No. 9, with 90° angle<br />outlet M20x1,5RHk nut - 12S
3913 <p>oxygen 300 baracc. to DIN 477-5 No. 595-pack #911025 in PE-foil bag</p><p>incl. test report 2.2</p>
3914 <p>inert gases and fuel gases 300 baracc. to DIN 477- 5, No. 54, 56 und 575-pack #911028 in PE-foil bag</p><p>incl. test report 2.2</p>
6840 Vulkan F15/200 Effect LabLine nitrogen cylinder pressure reducer 0-1.5 bar, fully chrome-plated with a metal diaphragm for gas purity 5.0, with pre-pressure compensation for constant back pressure under all operating conditions<br />Standards & Design:<br /><br />single-stage design, with shut-off valve, with safety gauges according to DIN EN ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 0-1<br />according to DIN 477-1 No<br /><br />Functional elements:<br /><br />• shut-off valve, with safety gauges according to DIN EN ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 0-1<br /><br />Technical data:<br /><br />• maximum inlet pressure: 200 bar, adjustable outlet pressure: 0-1<br />• outlet pressure: 0-1<br />• output: 8 Nm³/h compressed air at 1<br />• Inlet: W24<br />• outlet: 6 mm stainless steel compression fitting<br /><br />Dimensions:<br /><br />Width x Height x Depth: 210 x 190 x 75 mm
6841 <p>Vulkan F15/200 Effect LabLine nitrogen cylinder pressure reducer 0-1.5 bar, fully chrome-plated with a metal diaphragm for gas purity 5.0, with pre-pressure compensation for constant back pressure under all operating conditions<br>Standards & Design:<br><br>single-stage design, with shut-off valve, with safety gauges according to DIN EN ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 0-1<br>according to DIN 477-1 No<br><br>Functional elements:<br><br>• shut-off valve, with safety gauges according to DIN EN ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 0-1<br><br>Technical data:<br><br>• maximum inlet pressure: 200 bar, adjustable outlet pressure: 0-1<br>• outlet pressure: 0-1<br>• output: 8 Nm³/h compressed air at 1<br>• Inlet: W24<br>• outlet: 6 mm stainless steel compression fitting<br><br>Dimensions:<br><br>Width x Height x Depth: 210 x 190 x 75 mm</p>
6843 Vulkan F15/200 Effect LabLine nitrogen cylinder pressure reducer 0-1.5 bar, fully chrome-plated with a metal diaphragm for gas purity 5.0, with pre-pressure compensation for constant back pressure under all operating conditions<br />Standards & Design:<br /><br />single-stage design, with shut-off valve, with safety gauges according to DIN EN ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 0-1<br />according to DIN 477-1 No<br /><br />Functional elements:<br /><br />• shut-off valve, with safety gauges according to DIN EN ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 0-1<br /><br />Technical data:<br /><br />• maximum inlet pressure: 200 bar, adjustable outlet pressure: 0-1<br />• outlet pressure: 0-1<br />• output: 8 Nm³/h compressed air at 1<br />• Inlet: W24<br />• outlet: 6 mm stainless steel compression fitting<br /><br />Dimensions:<br /><br />Width x Height x Depth: 210 x 190 x 75 mm
6846 <p>Vulkan F15/200 Effect LabLine nitrogen cylinder pressure reducer 0-1.5 bar, fully chrome-plated with a metal diaphragm for gas purity 5.0, with pre-pressure compensation for constant back pressure under all operating conditions<br>Standards & Design:<br><br>single-stage design, with shut-off valve, with safety gauges according to DIN EN ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 0-1<br>according to DIN 477-1 No<br><br>Functional elements:<br><br>• shut-off valve, with safety gauges according to DIN EN ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 0-1<br><br>Technical data:<br><br>• maximum inlet pressure: 200 bar, adjustable outlet pressure: 0-1<br>• outlet pressure: 0-1<br>• output: 8 Nm³/h compressed air at 1<br>• Inlet: W24<br>• outlet: 6 mm stainless steel compression fitting<br><br>Dimensions:<br><br>Width x Height x Depth: 210 x 190 x 75 mm</p>
6947 flexible Metall hose with two anti kink springs and anti whip cable assembled complete mounted on hose, length: 1.000 mminlet W21,8x1/14RHf nut acc. to DIN 477-1, No. 6, with 90° angle<br />outlet M20x1,5RHk nut - 12S
6948 free of oil- and grease, acc. to ISO 7291, with metal diaphragm, single stage, with safety gauges acc. to ISO 5171inlet pressure max: 100 bar<br />outlet pressure: 0 – 20 bar adjustable<br />flow max: 75 Nm³/h compr. air at 20 bar outlet pressure <br />inlet: (rear): M 24x1,5 RHk - S16 nut<br />outlet: G3/4RH x 18mm brazing piece<br />relief valve with mounted copper pipe bend (270 °, 10x1 mm)<br />inlet gauge: 0 – 160/100 bar<br />working gauge: 0 – 40/20 bar<br />width x height x depth: 170 x 200 x 106 mm<br />With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "N", additional sticker on foil: "No cost-free redemption when foil is damaged "<br />The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br />Test report and test report 2.2<br />with sticker "not for oxygen use"<br /><br />Due to the cooling energy evolving from the decompression, the output of the regulator is strongly limited and does not comply with the above mentioned value indicated for the use of compressed air.<br />For continously high flow the additional use of a gas pre heater may be necessary.
6949 <p>acc to DIN EN ISO 2503, class 10, single stage, with double flowmeter for exact control of the flow in Nl/min, with high pressure compensation for constant working pressure with safety gauge acc. to ISO 5171, with shut off valveinlet pressure max: 200 bar</p><p>outlet pressure: 1,5 bar pre adjusted<br><br>flow: 2 x 2-23 Nl/min. adjustable<br><br>inlet: W 24,32x1/14 RH nut acc. to DIN 477-1, no. 1<br><br>outlet: 2x G 1/4 RHk x 6 mm tail-piece acc. EN 560<br><br>inlet gauge: 0 – 315/200 bar<br><br>width x height x depth: 250 x 230 x 130 mm<br><br>with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape</p>
6950 acc. to ISO 2503, single stage with safety gauges acc. to EN562inlet pressure max:200 bar<br />outlet pressure: 10 - 200 bar adjustable<br />flow max: 380 Nm³/h at 50 bar outlet pressure <br />inlet connection: W 24,32x1/14 RH nut acc. to DIN 477-1, no. 10<br />outlet connection: W24,32x1/14RH male acc. to DIN 477-1, no. 10<br />inlet gauge: 0 – 315/200 bar<br />working gauge: 0 – 315/200 bar<br />width x height x depth: 210 x 190 x 75 mm<br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
6951 acc to EN 13918, class 10, single stage, with flowmeter for exact control of the flow in Nl/min, TÜV – approved following Pressure equipment Directive 97/23/EG with high pressure compensation for constant working pressure with safety gauge acc. to ISO 5171, with shut off valveinlet pressure max: 300 bar<br />outlet pressure: 1,5 bar pre adjusted<br />flow: 4 – 32 Nl/min. adjustable<br />inlet: W 30x2 RH nut acc. to DIN 477-5<br />outlet: G 1/4 RHk x 6 mm tail-piece acc. EN 560<br />inlet gauge: 0 – 400/300 bar<br />width x height x depth:: 210 x 230 x 75 mm
6952 <p>free of oil- and grease, for inert gas, fuel gas and oxygen, adiabatic compression tested,consisting of: HP double shut-off valve, with an input with sintered filter, non-return valve, purge valve and high-pressure gauge and connection for a cylinder/bundle manifold module, completely mounted on stainless steel base plate</p><p>inlet: M 20x1,5 RHak -12S usuage for 1 cylinder or bundles<br><br>outlet: M 24 x 1.5 RHak - 16S to connect a main pressure regulator<br><br>width x height x depth: 370 x 205 x 160 mm<br><br>With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "O", <br><br>The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br><br>Test report and test report 2.2</p>
6953 <p>free of oil- and grease, for inert gas, fuel gas and oxygen, adiabatic compression tested,consisting of:</p><p>1 HP double shut-off valve, <br><br>2 distribution blocks, each with an input with sintered filter, non-return valve, purge valve and high-pressure gauge and connection for a cylinder/bundle manifold module, completely mounted on stainless steel base plate,<br><br>inlet pressure max: 300 bar<br><br>inlets (bottom): 2 x M 20x1, 5 RHak-12S for operating 2 x 1 cylinder or bundle<br><br>outlet: M 24 x 1.5 RHak - 16S to connect a main pressure regulator<br><br>width x height x depth: 370 x 205 x 160 mm<br><br>With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "O", <br><br>The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br><br>Test report and test report 2.2</p>
6954 <p>free of oil- and grease, for inert gas, fuel gas and oxygen, consisting of:</p><p>1 distribution block with an input with sintered filter, non-return valve and connection for a cylinder/bundle manifold module, completely mounted on stainless steel base plate,<br><br>inlet pressure max: 300 bar<br><br>input (bottom): M 20x1, 5 RHak-12S for operating of cylinder<br><br>outlet (left): M 20x1, 5 RHk-12S nut to connect to a manifold<br><br>outlet (right): M 20x1, 5 RHak-12S to connect to further manifold module <br><br>Width x height x depth: 315x 167 x 110 mm<br><br>With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "O", additional sticker on foil: "No cost-free redemption when foil is damaged "<br><br>The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br><br>Test report and test report 2.2</p>
6955 <p>free of oil- and grease, for inert gas, fuel gas and oxygen, consisting of:</p><p>1 distribution block with an input with sintered filter, non-return valve and connection for a cylinder/bundle manifold module, completely mounted on stainless steel base plate,<br><br>inlet pressure max: 300 bar<br><br>input (bottom): M 20x1, 5 RHak-12S for operating of cylinder<br><br>outlet (right): M 20x1, 5 RHk-12S nut to connect to a manifold<br><br>outlet (left): M 20x1, 5 RHak-12S to connect to further manifold module <br><br>Width x height x depth: 315x 167 x 110 mm<br><br>With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "O", additional sticker on foil: "No cost-free redemption when foil is damaged "<br><br>The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br><br>Test report and test report 2.2</p>
6956 <p>free of oil- and grease, for inert gas, fuel gas and oxygen, consisting of:</p><p>1 distribution block with an input with sintered filter, non-return valve and connection for a cylinder/bundle manifold module, completely mounted on stainless steel base plate,<br><br>inlet pressure max: 300 bar<br><br>input (bottom): M 20x1, 5 RHak-12S for operating of cylinder<br><br>outlet (right): M 20x1, 5 RHk-12S nut to connect to a manifold<br><br>outlet (left): M 20x1, 5 RHak-12S to connect to further manifold module <br><br>Width x height x depth: 915x 167 x 110 mm<br><br>With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "O", additional sticker on foil: "No cost-free redemption when foil is damaged "<br><br>The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br><br>Test report and test report 2.2</p>
6957 <p>free of oil- and grease, for inert gas, fuel gas and oxygen, consisting of:</p><p>1 distribution block with an input with sintered filter, non-return valve and connection for a cylinder/bundle manifold module, completely mounted on stainless steel base plate,<br><br>inlet pressure max: 300 bar<br><br>input (bottom): M 20x1, 5 RHak-12S for operating of cylinder<br><br>outlet (right): M 20x1, 5 RHk-12S nut to connect to a manifold<br><br>outlet (left): M 20x1, 5 RHak-12S to connect to further manifold module <br><br>Width x height x depth: 915 x 167 x 110 mm<br><br>With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "O", additional sticker on foil: "No cost-free redemption when foil is damaged "<br><br>The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br><br>Test report and test report 2.2</p>
6958 <p>free of oil- and grease, for oxygen, consisting of: 2 HP shut-off valve, 2 pressure regulator H 40 acc. to ISO 7291, adiabatic compression tested acc. to ISO7291, with metal diaphragm and HP-contact gauges with inductive-contact, 2 distribution blocks, each with an input with sintered filter, non-return valve, purge valve and high-pressure gauge and connection for a cylinder/bundle manifold module, completely mounted on stainless steel base plate</p><p>inlet pressure max: 300 bar<br><br>outlet pressure: 28 bar fixed<br><br>flow max: 125 Nm³/h air at 28 bar outlet pressure <br><br>inlet: 2 x M 20x1,5 RHak -12S usuage for 2x1 cylinders or bundles<br><br>outlet: G 3/4 RH x 18 mm soldered bush<br><br>inlet gauge: 0 – 400/300 bar<br><br>outlet gauge: 0 – 60/40 bar<br><br>width x height x depth: 875 x 325 x 195 mm<br><br>With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "O", additional sticker on foil: "No cost-free redemption when foil is damaged "<br><br>The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br><br>Test report and test report 2.2</p>
6959 <p>free of oil- and grease, for oxygen,consisting of: 2 HP shut-off valve, 2 pressure regulator H20 acc to ISO 7291, single stage, adiabatic compression tested acc. to ISO7291, with metal diaphragm and HP-contact gauges with inductive-contact (NO), 1 change over block and 2 distribution blocks, each with an input with sintered filter, non-return valve, purge valve and high-pressure gauge and connection for a cylinder/bundle manifold module, completely mounted on stainless steel base plate</p><p>inlet pressure max: 300 bar<br><br>outlet pressure: 15 bar fixed<br><br>flow max: 75 Nm³/h air at 15 bar outlet pressure <br><br>inlet: 2 x M 20x1,5 RHak -12S usuage for 2x1 cylinders or bundles<br><br>outlet: G 3/4 RH x 18 mm soldered bush<br><br>inlet gauge: 0 – 400/300 bar<br><br>outlet gauge: 0 – 40/20 bar<br><br>width x height x depth: 875 x 325 x 195 mm<br><br>With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "O", additional sticker on foil: "No cost-free redemption when foil is damaged "<br><br>The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br><br>Test report and test report 2.2</p>
6960 <p>free of oil- and grease, for oxygen, consisting of: 2 HP shut-off valve, 2 pressure regulator HR 40 acc. to ISO 7291, adiabatic compression tested acc. to ISO7291, with metal diaphragm and HP-contact gauges with inductive-contact, 2 distribution blocks, each with an input with sintered filter, non-return valve, purge valve and high-pressure gauge and connection for a cylinder/bundle manifold module, completely mounted on stainless steel base plate</p><p>inlet pressure max: 300 bar<br><br>outlet pressure: 28 bar fixed<br><br>flow max: 250 Nm³/h air at 28 bar outlet pressure <br><br>inlet: 2 x M 20x1,5 RHak -12S usuage for 2x1 cylinders or bundles<br><br>outlet: G 3/4 RH x 18 mm soldered bush<br><br>inlet gauge: 0 – 400/300 bar<br><br>outlet gauge: 0 – 60/40 bar<br><br>width x height x depth: 875 x 325 x 195 mm<br><br>With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "O", additional sticker on foil: "No cost-free redemption when foil is damaged "<br><br>The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br><br>Test report and test report 2.2</p>
6961 <p>free of oil- and grease, for hydrogen an forming gas,consisting of: 2 HP shut-off valve, 2 pressure regulator H40 acc to ISO 7291, single stage, with metal diaphragm and HP-contact gauges with inductive-contact (NO), 2 solenoid valves 230VAC, 1 double non return valve and 2 distribution blocks, each with an input with sintered filter, non-return valve, purge valve and high-pressure gauge and connection for a cylinder/bundle manifold module, completely mounted on stainless steel base plate</p> <p>inlet pressure max: 300 bar<br><br>outlet pressure: 25 bar fixed<br><br>flow max: 125 Nm³/h air at 40 bar outlet pressure <br><br>inlet: 2 x M 20x1,5 RHak -12S usuage for 2x1 cylinders or bundles<br><br>outlet: G 3/4 RH x 18 mm soldered bush<br><br>inlet gauge: 0 – 400/300 bar<br><br>outlet gauge: 0 – 60/40 bar<br><br>width x height x depth: 1.095 x 325 x 195 mm<br><br>With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "H", additional sticker on foil: "No cost-free redemption when foil is damaged "<br><br>The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br><br>Test report and test report 2.2<br><br>With note labeld: "not for oxygen use"</p>
6962 <p>free of oil- and grease, for hydrogen and forming gas, consisting of: 2 HP shut-off valve, 2 pressure regulator H20 acc to ISO 7291, single stage, with metal diaphragm and HP-contact gauges with inductive-contact (NO), electric cable blue, length 2.000mm</p> <p>2 solenoid valves 230VAC, <br><br>1 double non return valve and <br><br>2 distribution blocks, each with an input with sintered filter, non-return valve, purge valve and high-pressure gauge and connection for a cylinder/bundle manifold module, completely mounted on stainless steel base plate<br><br>inlet pressure max: 300 bar<br><br>outlet pressure: 15 bar fixed<br><br>flow max: 75 Nm³/h air at 15 bar outlet pressure <br><br>inlet: 2 x M 20x1,5 RHak -12S usuage for 2x1 cylinders or bundles<br><br>outlet: G 3/4 RH x 18 mm soldered bush<br><br>inlet gauge: 0 – 400/300 bar<br><br>outlet gauge: 0 – 40/20 bar<br><br>width x height x depth: 1095 x 300 x 195 mm<br><br>With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "H", additional sticker on foil: "No cost-free redemption when foil is damaged "<br><br>The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br><br>Test report and test report 2.2<br><br>with warning note:"not to use with oxygen"</p>
6963 <p>free of oil- and grease, for nitrogen and compressed air,consisting of: 2 HP shut-off valve, 2 pressure regulator H40 acc. to ISO 7291, single stage, with metal diaphragm and HP-contact gauges with inductive-contact (NO), 2 solenoid valves 230VAC, 1 double non return valve and 2 distribution blocks, each with an input with sintered filter, non-return valve, purge valve and high-pressure gauge and connection for a cylinder/bundle manifold module, completely mounted on stainless steel base plate</p><p>inlet pressure max: 300 bar<br><br>outlet pressure: 40 bar fixed<br><br>flow max: 125 Nm³/h air at 40 bar outlet pressure <br><br>inlet: 2 x M 20x1,5 RHak -12S usuage for 2x1 cylinders or bundles<br><br>outlet: G 3/4 RH x 18 mm soldered bush<br><br>inlet gauge: 0 – 400/300 bar<br><br>outlet gauge: 0 – 60/40 bar<br><br>width x height x depth: 1.095 x 325 x 195 mm<br><br>With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "N", additional sticker on foil: "No cost-free redemption when foil is damaged "<br><br>The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br><br>Test report and test report 2.2<br><br>With sticker "Not for oxygen use"</p>
6964 <p>free of oil- and grease, for nitrogen, compressed air and helium use, consisting of: 2 HP shut-off valve, 2 pressure regulator HR40 acc to ISO 7291, single stage, with metal diaphragm and HP-contact gauges with inductive-contact (NO), 2 solenoid valves 230VAC, 1 double non return valve and 2 distribution blocks, each with an input with sintered filter, non-return valve, connection for a safety valve, purge valve and high-pressure gauge and connection for a cylinder/bundle manifold module, completely mounted on stainless steel base plate</p> <p>inlet pressure max: 300 bar<br><br>outlet pressure: 40 bar fixed<br><br>flow max: 250 Nm³/h air at 40 bar outlet pressure <br><br>inlet: 2 x M 20x1,5 RHak -12S usuage for 2x1 cylinders or bundles<br><br>outlet: G 3/4 RH x 18 mm soldered bush<br><br>inlet gauge: 0 – 400/300 bar<br><br>outlet gauge: 0 – 60/40 bar<br><br>width x height x depth: 1095 x 320 x 160 mm<br><br>With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "N", additional sticker on foil: "No cost-free redemption when foil is damaged "<br><br>The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br><br>Test report and test report 2.2<br><br>labeld with sticker "not for oxygen use"</p>
6965 <p>free of oil- and grease, for oxygen,consisting of: 2 HP shut-off valve, 2 pressure regulator H40 acc to ISO 7291, single stage, adiabatic compression tested, with metal diaphragm and HP-contact gauges with inductive-contact (NO), 2 solenoid valves 230VAC, 1 double non return valve and 2 distribution blocks, each with an input with sintered filter, non-return valve, purge valve and high-pressure gauge and connection for a cylinder/bundle manifold module, completely mounted on stainless steel base plate</p> <p>inlet pressure max: 300 bar<br><br>outlet pressure: 25 bar fixed<br><br>flow max: 125 Nm³/h air at 25 bar outlet pressure <br><br>inlet: 2 x M 20x1,5 RHak -12S usuage for 2x1 cylinders or bundles<br><br>outlet: G 3/4 RH x 18 mm soldered bush<br><br>inlet gauge: 0 – 400/300 bar<br><br>outlet gauge: 0 – 60/40 bar<br><br>width x height x depth: 1.095 x 325 x 195 mm<br><br>With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "O", additional sticker on foil: "No cost-free redemption when foil is damaged "<br><br>The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br><br>Test report and test report 2.2</p>
6966 <p>Automatic manifold Vulkan 300 bar Linde free of oil- and grease, for oxygen,consisting of: 2 HP shut-off valve, 2 pressure regulator H20 acc to ISO 7291, single stage, adiabatic compression tested acc. to ISO7291, with metal diaphragm and HP-contact gauges with inductive-contact (NO), 2 solenoid valves 230VAC, 1 double non return valve and 2 distribution blocks, each with an input with sintered filter, non-return valve, purge valve and high-pressure gauge and connection for a cylinder/bundle manifold module, completely mounted on stainless steel base plate</p> <p>inlet pressure max: 300 bar<br><br>outlet pressure: 15 bar fixed<br><br>flow max: 75 Nm³/h air at 15 bar outlet pressure <br><br>inlet: 2 x M 20x1,5 RHak -12S usuage for 2x1 cylinders or bundles<br><br>outlet: G 3/4 RH x 18 mm soldered bush<br><br>inlet gauge: 0 – 400/300 bar<br><br>outlet gauge: 0 – 40/20 bar<br><br>width x height x depth: 1095 x 300 x 195 mm<br><br>With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "O", additional sticker on foil: "No cost-free redemption when foil is damaged "<br><br>The product fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br><br>Test report and test report 2.2</p>
6967 <p>free of oil- and grease, for MISON,consisting of: 2 HP shut-off valve, 2 pressure regulator HR20 acc to ISO 7291, single stage, with metal diaphragm and HP-contact gauges with inductive-contact (NO), 2 solenoid valves 230VAC, 1 double non return valve and 2 distribution blocks, each with an input with sintered filter, non-return valve, connection for a safety valve, purge valve and high-pressure gauge and connection for a cylinder/bundle manifold module, completely mounted on stainless steel base plate</p><p>inlet pressure max: 300 bar<br><br>outlet pressure: 20 bar fixed<br><br>flow max: 160 Nm³/h air at 20 bar outlet pressure <br><br>inlet: 2 x M 20x1,5 RHak -12S usuage for 2x1 cylinders or bundles<br><br>outlet: G 3/4 RH x 18 mm soldered bush<br><br>inlet gauge: 0 – 400/300 bar<br><br>outlet gauge: 0 – 40/20 bar<br><br>width x height x depth: 1095 x 475 x 195 mm<br><br>With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "N", additional sticker on foil: "No cost-free redemption when foil is damaged "<br><br>The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br><br>Test report and test report 2.2<br><br>with warning note:"not to use with oxygen"</p>
6968 <p>free of oil- and grease, for oxygen use, consisting of: 2 HP shut-off valve, 2 pressure regulator HR40 acc. to ISO 7291, adiabatic compression tested acc. to ISO 7291 single stage, with metal diaphragm and HP-contact gauges with inductive-contact (NO), 2 solenoid valves 230VAC, 1 double non return valve and 2 distribution blocks, each with an input with sintered filter, non-return valve, connection for a safety valve, purge valve and high-pressure gauge and connection for a cylinder/bundle manifold module, completely mounted on stainless steel base plate</p><p>inlet pressure max: 300 bar<br><br>outlet pressure: 25 bar fixed<br><br>flow max: 250 Nm³/h air at 40 bar outlet pressure <br><br>inlet: 2 x M 20x1,5 RHak -12S usuage for 2x1 cylinders or bundles<br><br>outlet: G 3/4 RH x 18 mm soldered bush<br><br>inlet gauge: 0 – 400/300 bar<br><br>outlet gauge: 0 – 60/40 bar<br><br>width x height x depth: 1095 x 325 x 195 mm<br><br>With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "O", additional sticker on foil: "No cost-free redemption when foil is damaged "<br><br>The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br><br>Test report and test report 2.2</p>
6969 <p>to pre heat the gas in the high pressure area,consisting of:</p><p>gas preheater GPH 200, PN 300, heating power 200 W, protection class housing: IP65, plug: IP44, supply voltage 230V/ 50 Hz, complete with electric cable 2m and plug, <br><br>inlet M20x1, 5RHak - 12S<br><br>outlet M20x1, 5RHk nut 12S<br><br>completely assembled on a base plate made of stainless steel<br><br>width x height x depth: 305 x 167 x 130 mm<br><br>With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "O", additional sticker on foil: "No cost-free redemption when foil is damaged "<br><br>The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br><br>Test report and test report 2.2</p>
12259 <p> Sigma series cylinder pressure regulators are designed for precise and reliable pressure control in applications involving technical, medical, corrosive, laboratory, and high-purity gases. The modular design allows flexible configuration depending on gas type, required pressure range, and connection standards. </p> <p> The regulators are available in both single-stage and dual-stage versions. Dual-stage models ensure stable downstream pressure regardless of decreasing cylinder pressure, making them suitable for applications requiring high accuracy and consistency. </p> <p> A wide range of inlet and outlet configurations is supported, including various cylinder connection standards (e.g. DIN 477 and others) as well as multiple outlet options such as threaded connections or compression fittings. This flexibility allows seamless integration into different gas supply systems. </p> <p> The Sigma series is engineered for demanding environments and supports gas purity levels up to 6.0. Depending on configuration, regulators are available with bodies made of chrome-plated brass, stainless steel or Monel, and diaphragms made of stainless steel or Hastelloy, ensuring durability and chemical resistance. </p> <p> Additional configuration options include shut-off or metering valves, pressure gauges or transmitters, as well as internal or external gas purging systems. </p> <p> All models comply with relevant industrial and safety standards, including ATEX and PED, and are designed for operation in a wide temperature range. </p> <h2>Key Benefits</h2> <ul> <li>High pressure control accuracy</li> <li>Stable outlet pressure, especially in dual-stage configurations</li> <li>Wide range of connection standards and configuration options</li> <li>Suitable for high-purity and corrosive gases</li> <li>Modular design for application-specific customization</li> <li>Reliable operation in industrial, laboratory and medical environments</li> </ul> <h2>Typical Applications</h2> <ul> <li>Gas distribution systems</li> <li>Laboratories and research facilities</li> <li>Medical gas supply systems</li> <li>Industrial gas processes</li> <li>High-purity gas applications</li> </ul>
12349 Compact single-stage cylinder pressure regulator (ISO 2503) for technical, medical, corrosive, laboratory and high-purity gases; very high regulation accuracy for setting very low pressures in the mbar range; inlet (right): cylinder connection per DIN 477-1 or DIN 477-5, alternatively 1/4" NPT-F; outlet: compression fitting, alternatively 1/4" NPT-F; inlet pressure gauge Ø50 mm (DIN 837) and outlet pressure gauge Ø63 mm (DIN 837); 50 µm inlet filter; relief valve; gas purity up to 6.0; max inlet pressure 15 bar; outlet pressure ranges 50–1000 mbar; temperature -40 to +70 °C; body materials: chrome-plated brass, stainless steel or Monel; diaphragm: stainless steel or Hastelloy; ECD compatible; leak rate < 1×10^-8 (He); ATEX and PED compliant; options: shut-off or metering valve, purge system (self or external), contact gauge or pressure transmitter.
12364 Compact two-stage cylinder pressure regulator (ISO 2503) for technical, medical, corrosive, laboratory and high-purity gases; very high regulation accuracy for setting very low pressures in the mbar range; inlet (right): cylinder connection per DIN 477-1 or DIN 477-5, alternatively 1/4" NPT-F; outlet: compression fitting, alternatively 1/4" NPT-F; inlet pressure gauge Ø50 mm (DIN 837) and outlet pressure gauge Ø63 mm (DIN 837); 50 µm inlet filter; relief valve in each stage; gas purity up to 6.0; max inlet pressure up to 300 bar depending on standard, 210 bar for the DIN 477-1 No. 6 configuration shown in the ordering example; outlet pressure ranges 50–1000 mbar; temperature -40 to +70 °C; body materials: chrome-plated brass, stainless steel or Monel; diaphragm: stainless steel or Hastelloy; ECD compatible; leak rate < 1×10^-8 (He); ATEX and PED compliant; options: shut-off or metering valve, purge system (self or external), contact gauge or pressure transmitter.
12379 Compact single-stage cylinder pressure regulator (based on ISO 2503) for technical, medical, corrosive, laboratory and high-purity gases; compact design and high regulation accuracy; inlet (right): cylinder connection per DIN 477-1 or other standards on request; outlet: compression fitting or customer-specific connection; inlet and outlet pressure gauges Ø50 mm (DIN EN 837); 50 µm inlet filter; relief valve; gas purity up to 6.0; max inlet pressure up to 200 bar in specification, with ordering code variants L/H/300 for 70/210/300 bar inlet classes; outlet pressure ranges 1.5–30 bar (special ranges up to 60 bar possible); temperature -40 to +70 °C; body materials: chrome-plated brass, stainless steel or Monel; diaphragm: stainless steel or Hastelloy; ECD compatible; leak rate < 1×10^-8 (He); PED and ATEX compliant; options: shut-off or metering valve, purge system (self or external), contact gauge or pressure transmitter.
12424 <p>Compact single-stage line pressure regulator according to ISO 2503 for technical, medical, corrosive, laboratory and high-purity gases. Inlet and outlet: 1/4" NPT-F thread or compression fitting. Outlet pressure gauge Ø50 mm according to DIN 837. 50 µm inlet filter and relief valve. Gas purity up to 6.0. Maximum inlet pressure up to 300 bar depending on standard; coding legend additionally defines inlet pressure classes L=70 bar, H=210 bar, 300=300 bar (brass only), 400=400 bar (stainless steel only). Outlet pressure ranges from 1.5 to 30 bar, special ranges up to 60 bar possible. Temperature range -40 to +70 °C. Body materials: chrome-plated brass, stainless steel or Monel. Membrane materials: stainless steel or Hastelloy. ECD suitable. Leak rate &lt; 1×10^-8 (helium). ATEX and PED compliant. Options include inlet gauge, shut-off or metering valve, self or external purge system, contact gauge or pressure transmitter.</p>
12464 <p>Compact single-stage pressure control station (manifold) for one cylinder, designed for technical, medical, corrosive, laboratory and high-purity gases. Equipped with one main pressure regulator, inlet and outlet pressure gauges (Ø 50 mm, DIN 837), 50 µm inlet filter and relief valve. Includes one stainless steel corrugated metal hose, 1,000 mm long, for cylinder connection. Completely mounted on a stainless steel base plate with fixing holes. Inlet: cylinder connection according to DIN 477 Part 1 or Part 5. Outlet: compression fitting or alternatively 1/4" NPT-F thread. Maximum inlet pressure up to 300 bar depending on standard. Outlet pressure ranges from 1.5 to 30 bar; special ranges up to 60 bar are possible. Temperature range: -40 to +70 °C. Body materials: chrome-plated brass, stainless steel or Monel. Membranes: stainless steel or Hastelloy. ECD suitable. Leak rate &lt; 1×10^-8 (helium). ATEX and PED compliant. Options include shut-off or metering valve, purge system and contact gauge or pressure transmitter.</p>
12504 Compact single-stage cylinder pressure regulator type Thanos in accordance with ISO 2503 for technical, medical, corrosive, laboratory and high-purity gases. Features: compact design, high control accuracy, inlet (right) with cylinder connection per DIN 477-1 or DIN 477-5, alternatively 1/4" NPT-F; outlet: compression fitting or threaded fitting; inlet pressure gauge and outlet pressure gauge Ø 50 mm (DIN EN 837); 74 µm inlet filter; relief valve; gas purity up to 6.0; temperature range -20 to +60 °C; body materials: nickel-plated brass or stainless steel 316L; diaphragm: stainless steel 316L; seat: PCTFE; leak rate < 2×10⁻⁸ mbar·l/s (He); compliant with 2014/68/EU (PED) and 2014/34/EU (ATEX). Options: shut-off or metering valve, purge system (internal or external), contact gauge or pressure transmitter.
12524 Compact two-stage cylinder pressure regulator type Thanos II in accordance with ISO 2503 for technical, medical, corrosive, laboratory and high-purity gases. Two-stage design provides absolutely constant outlet pressure even as cylinder pressure decreases. Features: compact design, high control accuracy, inlet (right) with cylinder connection per DIN 477-1 or DIN 477-5, alternatively 1/4" NPT-F; outlet: compression fitting or threaded fitting; inlet and outlet pressure gauges Ø 50 mm (DIN EN 837); 74 µm inlet filter; relief valve; gas purity up to 6.0; temperature range -20 to +60 °C; body materials: nickel-plated brass or stainless steel 316L; diaphragm: stainless steel 316L; seat: PCTFE; leak rate < 2×10⁻⁸ mbar·l/s (He); compliant with 2014/68/EU (PED) and 2014/34/EU (ATEX). Options: shut-off or metering valve, purge system (internal or external), contact gauge or pressure transmitter.
12536 Compact single-stage line pressure regulator type Thanos in accordance with ISO 2503 for technical, medical, corrosive, laboratory and high-purity gases. Features: compact design, high control accuracy, inlet and outlet: 1/4" NPT-F or according to customer requirements; outlet pressure gauge Ø 50 mm (DIN EN 837); 74 µm inlet filter; relief valve; gas purity up to 6.0; temperature range -20 to +60 °C; body materials: nickel-plated brass or stainless steel 316L; diaphragm: stainless steel 316L; seat: PCTFE; leak rate < 2×10⁻⁸ mbar·l/s (He); compliant with 2014/68/EU (PED) and 2014/34/EU (ATEX). Options: inlet pressure gauge, shut-off or metering valve, purge system (internal or external), contact gauge or pressure transmitter.
12546 Compact two-stage line pressure regulator type Thanos II in accordance with ISO 2503 for technical, medical, corrosive, laboratory and high-purity gases. Two-stage design provides absolutely constant outlet pressure even as inlet pressure fluctuates. Features: compact design, high control accuracy, inlet and outlet: 1/4" NPT-F or according to customer requirements; outlet pressure gauge Ø 50 mm (DIN EN 837); 74 µm inlet filter; relief valve; gas purity up to 6.0; temperature range -20 to +60 °C; body materials: nickel-plated brass or stainless steel 316L; diaphragm: stainless steel 316L; seat: PCTFE; leak rate < 2×10⁻⁸ mbar·l/s (He); compliant with 2014/68/EU (PED) and 2014/34/EU (ATEX). Options: inlet pressure gauge, shut-off or metering valve, purge system (internal or external), contact gauge or pressure transmitter.
12554 Compact two-stage line pressure regulator type Sigma II in accordance with ISO 2503 for technical, medical, corrosive, laboratory and high-purity gases. Two-stage design provides absolutely constant outlet pressure even as inlet pressure fluctuates. Features: compact design with high control accuracy; inlet and outlet: 1/4" NPT-F, alternatively compression fitting; outlet pressure gauge Ø 50 mm (DIN EN 837); 50 µm inlet filter; relief valve per stage; gas purity up to 6.0; temperature range -40 to +70 °C; body materials: chrome-plated brass, stainless steel or Monel; diaphragm: stainless steel or Hastelloy; seat: PCTFE; ECD compatible; ATEX compliant (94/9/EG); PED compliant (97/23/EG). Options: inlet pressure gauge Ø 50 mm, shut-off or metering valve, gas purging system (internal or external), contact gauge or pressure transmitter.
12594 Compact single-stage line fine pressure regulator type Omega I in accordance with ISO 2503 for technical, medical, corrosive, laboratory and high-purity gases. Designed for precise millibar-range outlet pressure control. Features: compact design with high control accuracy; inlet and outlet: 1/4" NPT-F, alternatively compression fitting; outlet pressure gauge Ø 63 mm; 50 µm inlet filter; relief valve; gas purity up to 6.0; temperature range -40 to +70 °C; body materials: chrome-plated brass, stainless steel or Monel; diaphragm: stainless steel or Hastelloy; seat: PCTFE; ECD compatible; ATEX compliant (94/9/EG); PED compliant (97/23/EG). Options: inlet pressure gauge, shut-off or metering valve, gas purging system (internal or external), contact gauge or pressure transmitter.
12609 Compact two-stage line fine pressure regulator type Omega II in accordance with ISO 2503 for technical, medical, corrosive, laboratory and high-purity gases. Two-stage design provides exceptionally stable millibar-range outlet pressure. Features: compact design with high control accuracy; inlet and outlet: 1/4" NPT-F, alternatively compression fitting; outlet pressure gauge Ø 63 mm; 50 µm inlet filter; 2 relief valves (one per stage); gas purity up to 6.0; temperature range -40 to +70 °C; body materials: chrome-plated brass, stainless steel or Monel; diaphragm: stainless steel or Hastelloy; seat: PCTFE; ECD compatible; ATEX compliant (94/9/EG); PED compliant (97/23/EG). Options: inlet pressure gauge, shut-off or metering valve, gas purging system (internal or external), contact gauge or pressure transmitter.
12624 Compact single-stage pressure control station (manifold) for two cylinders with manual changeover, designed for technical, medical, corrosive, laboratory and high-purity gases. Equipped with one main pressure regulator, inlet and outlet pressure gauges (Ø 50 mm, DIN 837), 50 µm inlet filter and relief valve. Includes 2 distribution blocks with shut-off valves for left and right cylinder changeover, and 2 stainless steel corrugated metal hoses (1,000 mm) for cylinder connection. Completely mounted on a stainless steel base plate with fixing holes. Inlet: cylinder connection according to DIN 477 Part 1 or Part 5. Outlet: compression fitting or alternatively 1/4" NPT-F thread. Maximum inlet pressure up to 300 bar depending on standard. Outlet pressure ranges from 1.5 to 30 bar; special ranges up to 60 bar. Temperature range: -40 to +70 °C. Body materials: chrome-plated brass, stainless steel or Monel. Diaphragm: stainless steel or Hastelloy. Seat: PCTFE. ECD suitable. Leak rate < 1×10⁻⁸ mbar·l/s (He). ATEX and PED compliant. Options: shut-off or metering valve, extension for more cylinders, purge system, contact gauge or pressure transmitter.
12654 Compact two-stage pressure control station (manifold) for two cylinders with manual changeover, designed for technical, medical, corrosive, laboratory and high-purity gases. Two-stage regulation ensures highly stable outlet pressure regardless of declining inlet pressure. Equipped with one main two-stage pressure regulator, inlet and outlet pressure gauges (Ø 50 mm, DIN 837), 50 µm inlet filter and relief valve per stage. Includes 2 distribution blocks with shut-off valves for left and right cylinder changeover, and 2 stainless steel corrugated metal hoses (1,000 mm) for cylinder connection. Completely mounted on a stainless steel base plate with fixing holes. Inlet: cylinder connection according to DIN 477 Part 1 or Part 5. Outlet: compression fitting or alternatively 1/4" NPT-F thread. Maximum inlet pressure up to 300 bar depending on standard. Outlet pressure ranges from 1.5 to 30 bar; special ranges up to 60 bar. Temperature range: -40 to +70 °C. Body materials: chrome-plated brass, stainless steel or Monel. Diaphragm: stainless steel or Hastelloy. Seat: PCTFE. ECD suitable. Leak rate < 1×10⁻⁸ mbar·l/s (He). ATEX and PED compliant. Options: shut-off or metering valve, extension for more cylinders, purge system, contact gauge or pressure transmitter.
12684 Compact single-stage semi-automatic pressure control station (manifold) for two cylinders, designed for technical, medical, corrosive, laboratory and high-purity gases. Features automatic switchover via pressure difference between two connected cylinders — when one cylinder is depleted, the system automatically switches to the full cylinder. Equipped with 2 main single-stage pressure regulators (one per side), inlet and outlet pressure gauges (Ø 50 mm, DIN 837), 50 µm inlet filter and relief valve. Includes 2 stainless steel corrugated metal hoses (1,000 mm) for cylinder connection. Completely mounted on a stainless steel base plate with fixing holes. Inlet: cylinder connection according to DIN 477 Part 1 or Part 5. Outlet: compression fitting or alternatively 1/4" NPT-F thread. Maximum inlet pressure up to 300 bar depending on standard. Outlet pressure ranges from 1.5 to 30 bar; special ranges up to 60 bar. Temperature range: -40 to +70 °C. Body materials: chrome-plated brass, stainless steel or Monel. Diaphragm: stainless steel or Hastelloy. Seat: PCTFE. ECD suitable. Leak rate < 1×10⁻⁸ mbar·l/s (He). ATEX and PED compliant. Options: shut-off or metering valve, purge system, contact gauge or pressure transmitter.
12714 Compact two-stage semi-automatic pressure control station (manifold) for two cylinders, designed for technical, medical, corrosive, laboratory and high-purity gases. Two-stage regulation ensures highly stable outlet pressure. Features automatic switchover via pressure difference — when one cylinder is depleted, the system automatically switches to the full cylinder. Equipped with 2 main two-stage pressure regulators (one per side), inlet and outlet pressure gauges (Ø 50 mm, DIN 837), 50 µm inlet filter and relief valve per stage. Includes 2 stainless steel corrugated metal hoses (1,000 mm) for cylinder connection. Completely mounted on a stainless steel base plate with fixing holes. Inlet: cylinder connection according to DIN 477 Part 1 or Part 5. Outlet: compression fitting or alternatively 1/4" NPT-F thread. Maximum inlet pressure up to 300 bar depending on standard. Outlet pressure ranges from 1.5 to 30 bar; special ranges up to 60 bar. Temperature range: -40 to +70 °C. Body materials: chrome-plated brass, stainless steel or Monel. Diaphragm: stainless steel or Hastelloy. Seat: PCTFE. ECD suitable. Leak rate < 1×10⁻⁸ mbar·l/s (He). ATEX and PED compliant. Options: shut-off or metering valve, purge system, contact gauge or pressure transmitter.
13127 Manual manifold base station Vulkan LabLine BS 50/300 Effect, chrome-plated. Modular add-on system (Modula Vareo). Manual switching. Complete on stainless steel base plate: 1× distributing block, 1× manifold regulator H10 acc. to ISO 7291, 1× main shut-off valve, with purge valves. Inlet max 300 bar, outlet 0–10 bar. Max. flow 50 Nm³/h. Stainless steel diaphragm. Gas purity up to 5.0. Dimensions: 570 × 250 × 210 mm, 10 kg.
13148 Single-cylinder manifold station Vulkan LabLine SE 10/2 300 (with standard gauges), chrome-plated. Modular add-on system. Manual switching. Complete on stainless steel base plate: 1× HP shut-off valve, 1× manifold regulator H10/2 double stage acc. to ISO 7291, 1× main shut-off valve, 1× purge valve, 1× cylinder rack. Inlet max 300 bar, outlet 0–10 bar. Max. flow 30 Nm³/h at 10 bar. Stainless steel diaphragm, gas purity up to 5.0. Dimensions: 480 × 280 × 110 mm.
13153 Single-cylinder manifold station Vulkan LabLine SE 10/2 300 (with contact gauge (Reed switch)), chrome-plated. Modular add-on system. Manual switching. Complete on stainless steel base plate: 1× HP shut-off valve, 1× manifold regulator H10/2 double stage acc. to ISO 7291, 1× main shut-off valve, 1× purge valve, 1× cylinder rack. Inlet max 300 bar, outlet 0–10 bar. Max. flow 30 Nm³/h at 10 bar. Stainless steel diaphragm, gas purity up to 5.0. Dimensions: 480 × 280 × 110 mm.
13260 Automatic switching manifold Vulkan LabLine AM 35/300 Effect, chrome-plated. Complete on stainless steel base plate: 2× manifold regulator H20 Effect acc. to ISO 7291, 2× ND-purge valves, 1× in-line regulator AD 35, 1× automatic change-over block, 1× main shut-off valve, without contact gauge. Inlet max 300 bar, outlet 0–10 bar, max flow 50 Nm³/h at 10 bar. Stainless steel diaphragm, gas purity up to 5.0. Dimensions: 450 × 420 × 210 mm.
13267 Automatic switching manifold Vulkan LabLine AM 35/300 K Effect, chrome-plated. Complete on stainless steel base plate: 2× manifold regulator H20 Effect acc. to ISO 7291, 2× ND-purge valves, 1× in-line regulator AD 35, 1× automatic change-over block, 1× main shut-off valve, 2× contact gauges with Reed switch. Inlet max 300 bar, outlet 0–10 bar, max flow 50 Nm³/h at 10 bar. Stainless steel diaphragm, gas purity up to 5.0. Dimensions: 450 × 420 × 210 mm.
13274 In-line regulator Vulkan LabLine L10, single stage, chrome-plated body with stainless steel diaphragm for gas purity up to 5.0. With safety gauges acc. to DIN EN ISO 5171. Inlet pressure max 20 bar, outlet pressure 0–10 bar adjustable. Max. flow 45 Nm³/h at 10 bar. Inlet: clamp ring 8 mm. Outlet: clamp ring 8 mm. Dimensions: 200 × 190 × 75 mm, 1.5 kg.
13280 In-line regulator Vulkan LabLine L15, single stage, chrome-plated body with stainless steel diaphragm for gas purity up to 5.0. With safety gauges acc. to DIN EN ISO 5171. Inlet pressure max 20 bar, outlet pressure 0–1.5 bar adjustable. Max. flow 8 Nm³/h at 1.5 bar. Inlet: clamp ring 8 mm. Outlet: clamp ring 8 mm. Dimensions: 200 × 190 × 75 mm, 1.5 kg.
13286 In-line regulator Vulkan LabLine L10/2, double stage, chrome-plated body with stainless steel diaphragm for gas purity up to 5.0. With safety gauges acc. to DIN EN ISO 5171. Inlet pressure max 20 bar, outlet pressure 0–10 bar adjustable. Max. flow 30 Nm³/h at 10 bar. Inlet: clamp ring 8 mm. Outlet: clamp ring 8 mm. Dimensions: 240 × 190 × 75 mm, 2.0 kg.
13292 In-line regulator Vulkan LabLine L15/2, double stage, chrome-plated body with stainless steel diaphragm for gas purity up to 5.0. With safety gauges acc. to DIN EN ISO 5171. Inlet pressure max 20 bar, outlet pressure 0–1.5 bar adjustable. Max. flow 8 Nm³/h at 1.5 bar. Inlet: clamp ring 8 mm. Outlet: clamp ring 8 mm. Dimensions: 240 × 190 × 75 mm, 2.0 kg.