SELECT 
  cscart_ult_product_descriptions.product_id, 
  cscart_ult_product_descriptions.short_description, 
  IF(
    cscart_ult_product_descriptions.short_description = "", 
    cscart_ult_product_descriptions.full_description, 
    ""
  ) AS full_description, 
  cscart_ult_product_descriptions.meta_keywords, 
  cscart_ult_product_descriptions.meta_description, 
  cscart_ult_product_descriptions.search_words, 
  cscart_ult_product_descriptions.promo_text 
FROM 
  cscart_ult_product_descriptions 
WHERE 
  cscart_ult_product_descriptions.product_id IN (
    281, 282, 283, 284, 332, 333, 334, 335, 
    336, 337, 3915, 3916, 3917, 3918, 3919, 
    3920, 3921, 3968, 3969, 3970, 3971, 
    3972, 3973, 3974, 4020, 4021, 4022, 
    4023, 4024, 4025, 4026, 4094, 4095, 
    4096, 4097, 4098, 4099, 4100, 4101, 
    4102, 4103, 4104, 4105, 4106, 4107, 
    4163, 4164, 4165, 4166, 4167, 4168, 
    4169, 4216, 4217, 4218, 4219, 4220, 
    4221, 4222, 196, 197, 198, 199, 200, 
    201, 202, 271, 272, 273, 274, 275, 276, 
    277, 325, 326, 327, 328, 329, 330, 415, 
    416, 417, 418, 3616, 3617, 3618, 4080, 
    4081, 4082, 4083, 4084, 4085, 4086, 
    4156, 4157, 4158
  ) 
  AND cscart_ult_product_descriptions.company_id = 1 
  AND cscart_ult_product_descriptions.lang_code = 'en'

Query time 0.00247

JSON explain

{
  "query_block": {
    "select_id": 1,
    "cost_info": {
      "query_cost": "67.21"
    },
    "table": {
      "table_name": "cscart_ult_product_descriptions",
      "access_type": "range",
      "possible_keys": [
        "PRIMARY",
        "product_id",
        "company_id"
      ],
      "key": "PRIMARY",
      "used_key_parts": [
        "product_id",
        "lang_code",
        "company_id"
      ],
      "key_length": "13",
      "rows_examined_per_scan": 96,
      "rows_produced_per_join": 96,
      "filtered": "100.00",
      "index_condition": "((`test2_gaseus`.`cscart_ult_product_descriptions`.`company_id` = 1) and (`test2_gaseus`.`cscart_ult_product_descriptions`.`product_id` in (281,282,283,284,332,333,334,335,336,337,3915,3916,3917,3918,3919,3920,3921,3968,3969,3970,3971,3972,3973,3974,4020,4021,4022,4023,4024,4025,4026,4094,4095,4096,4097,4098,4099,4100,4101,4102,4103,4104,4105,4106,4107,4163,4164,4165,4166,4167,4168,4169,4216,4217,4218,4219,4220,4221,4222,196,197,198,199,200,201,202,271,272,273,274,275,276,277,325,326,327,328,329,330,415,416,417,418,3616,3617,3618,4080,4081,4082,4083,4084,4085,4086,4156,4157,4158)) and (`test2_gaseus`.`cscart_ult_product_descriptions`.`lang_code` = 'en'))",
      "cost_info": {
        "read_cost": "57.61",
        "eval_cost": "9.60",
        "prefix_cost": "67.21",
        "data_read_per_join": "366K"
      },
      "used_columns": [
        "product_id",
        "lang_code",
        "company_id",
        "short_description",
        "full_description",
        "meta_keywords",
        "meta_description",
        "search_words",
        "promo_text"
      ]
    }
  }
}

Result

product_id short_description full_description meta_keywords meta_description search_words promo_text
196 <p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
197 <p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
198 <p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
199 <p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
200 <p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
201 <p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
202 <p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
271 <p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
272 <p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
273 <p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
274 <p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
275 <p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
276 <p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
277 <p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
281 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
282 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
283 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
284 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
325 <p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
326 <p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
327 <p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
328 <p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
329 <p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
330 <p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
332 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
333 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
334 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
335 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
336 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
337 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
415 <p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
416 <p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
417 <p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
418 <p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
3616 <p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
3617 <p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
3618 <p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
3915 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
3916 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
3917 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
3918 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
3919 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
3920 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
3921 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
3968 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
3969 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
3970 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
3971 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
3972 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
3973 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
3974 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4020 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4021 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4022 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4023 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4024 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4025 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4026 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4080 <p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4081 <p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4082 <p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4083 <p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4084 <p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4085 <p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4086 <p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4094 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4095 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4096 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4097 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4098 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4099 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4100 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4101 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4102 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4103 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4104 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4105 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4106 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4107 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4156 <p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4157 <p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4158 <p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4163 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4164 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4165 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4166 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4167 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4168 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4169 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4216 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4217 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4218 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4219 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4220 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4221 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4222 <p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>