SELECT 
  cscart_product_descriptions.product_id, 
  cscart_product_descriptions.short_description, 
  IF(
    cscart_product_descriptions.short_description = '' 
    OR cscart_product_descriptions.short_description IS NULL, 
    cscart_product_descriptions.full_description, 
    ''
  ) AS full_description, 
  cscart_product_descriptions.meta_keywords, 
  cscart_product_descriptions.meta_description, 
  cscart_product_descriptions.search_words, 
  cscart_product_descriptions.promo_text, 
  cscart_product_descriptions.unit_name 
FROM 
  cscart_product_descriptions 
WHERE 
  cscart_product_descriptions.product_id IN (
    6688, 6689, 6694, 6702, 6706, 6708, 6726, 
    6725, 3103, 3097, 3113, 6687, 6699, 
    36, 37, 38, 39, 40, 41, 42, 83, 84, 85, 
    86, 87, 88, 89, 147, 148, 149, 150, 151, 
    152, 153, 168, 169, 170, 171, 172, 173, 
    174, 250, 251, 252, 253, 254, 255, 256, 
    304, 305, 306, 307, 308, 309, 3532, 3533, 
    3534, 3535, 3536, 3537, 3538, 3947, 
    3948, 3949, 3950, 3951, 3952, 3953, 
    3992, 3993, 3994, 3995, 3996, 3997, 
    3998, 4052, 4053, 4054, 4055, 4056, 
    4057, 4058, 4135, 4136, 4137, 4138, 
    4139, 4140, 4141, 4188, 4189, 4190, 
    4191, 4192, 4193, 4194
  ) 
  AND cscart_product_descriptions.lang_code = 'en'

Query time 0.00193

JSON explain

{
  "query_block": {
    "select_id": 1,
    "cost_info": {
      "query_cost": "96.98"
    },
    "table": {
      "table_name": "cscart_product_descriptions",
      "access_type": "range",
      "possible_keys": [
        "PRIMARY",
        "product_id"
      ],
      "key": "PRIMARY",
      "used_key_parts": [
        "product_id",
        "lang_code"
      ],
      "key_length": "9",
      "rows_examined_per_scan": 96,
      "rows_produced_per_join": 96,
      "filtered": "100.00",
      "index_condition": "((`test2_gaseus`.`cscart_product_descriptions`.`product_id` in (6688,6689,6694,6702,6706,6708,6726,6725,3103,3097,3113,6687,6699,36,37,38,39,40,41,42,83,84,85,86,87,88,89,147,148,149,150,151,152,153,168,169,170,171,172,173,174,250,251,252,253,254,255,256,304,305,306,307,308,309,3532,3533,3534,3535,3536,3537,3538,3947,3948,3949,3950,3951,3952,3953,3992,3993,3994,3995,3996,3997,3998,4052,4053,4054,4055,4056,4057,4058,4135,4136,4137,4138,4139,4140,4141,4188,4189,4190,4191,4192,4193,4194)) and (`test2_gaseus`.`cscart_product_descriptions`.`lang_code` = 'en'))",
      "cost_info": {
        "read_cost": "87.38",
        "eval_cost": "9.60",
        "prefix_cost": "96.98",
        "data_read_per_join": "438K"
      },
      "used_columns": [
        "product_id",
        "lang_code",
        "short_description",
        "full_description",
        "meta_keywords",
        "meta_description",
        "search_words",
        "promo_text",
        "unit_name"
      ]
    }
  }
}

Result

product_id short_description full_description meta_keywords meta_description search_words promo_text unit_name
36 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
37 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
38 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
39 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
40 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
41 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
42 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
83 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
84 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
85 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
86 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
87 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
88 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
89 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
147 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
148 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
149 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
150 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
151 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
152 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
153 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
168 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
169 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
170 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
171 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
172 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
173 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
174 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
250 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
251 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
252 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
253 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
254 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
255 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
256 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
304 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
305 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
306 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
307 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
308 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
309 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3097 Vulkan LH40 line pressure reducer nitrogen G1/2RHi both sides 0.5 - 16 bar with safety pressure gauge<br />Standards & Design:<br /><br />according to DIN EN ISO 5171, Inlet pressure: max<br /><br />Technical data:<br /><br />• Outlet pressure: 0<br />• output: 150 Nm³/h air at 16 bar outlet pressure<br />• Inlet: internal thread G1/2 RHi, Outlet: internal thread G1/2 RHi, Working pressure gauge: 0 - 16/10 bar axial, Width x Height x Depth: 90 x 180 x 90 mm<br />• Outlet: internal thread G1/2 RHi, Working pressure gauge: 0 - 16/10 bar axial, Width x Height x Depth: 90 x 180 x 90 mm<br /><br />Dimensions:<br /><br />Width x Height x Depth: 90 x 180 x 90 mm
3103 Vulkan LH40 line pressure reducer for compressed air G1/2 RHi both sides 0.5 - 16 bar with safety pressure gauge<br />Standards & Design:<br /><br />according to DIN EN ISO 5171<br /><br />Technical data:<br /><br />• Outlet pressure: 0<br />• output: 150 Nm³/h air at 16 bar outlet pressure<br />• Inlet: internal thread G1/2 RHi<br />• Outlet: internal thread G1/2 RHi<br /><br />Dimensions:<br /><br />Width x Height x Depth: 90 x 180 x 90 mm
3113 Vulkan LH40 line pressure reducer nitrogen G1/2RHi both sides 0.5 - 16 bar with safety pressure gauge<br />Standards & Design:<br /><br />according to DIN EN ISO 5171, Inlet pressure: max<br /><br />Technical data:<br /><br />• Outlet pressure: 0<br />• output: 150 Nm³/h air at 16 bar outlet pressure<br />• Inlet: internal thread G1/2 RHi, Outlet: internal thread G1/2 RHi, Working pressure gauge: 0 - 16/10 bar axial, Width x Height x Depth: 90 x 180 x 90 mm<br />• Outlet: internal thread G1/2 RHi, Working pressure gauge: 0 - 16/10 bar axial, Width x Height x Depth: 90 x 180 x 90 mm<br /><br />Dimensions:<br /><br />Width x Height x Depth: 90 x 180 x 90 mm
3532 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3533 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3534 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3535 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3536 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3537 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3538 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3947 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3948 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3949 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3950 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3951 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3952 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3953 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3992 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3993 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3994 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3995 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3996 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3997 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3998 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4052 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4053 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4054 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4055 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4056 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4057 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4058 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4135 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4136 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4137 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4138 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4139 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4140 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4141 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4188 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4189 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4190 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4191 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4192 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4193 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4194 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
6687 Vulkan LH40 line pressure reducer nitrogen G1/2RHi both sides 0.5 - 16 bar with safety pressure gauge<br />Standards & Design:<br /><br />according to DIN EN ISO 5171, Inlet pressure: max<br /><br />Technical data:<br /><br />• Outlet pressure: 0<br />• output: 150 Nm³/h air at 16 bar outlet pressure<br />• Inlet: internal thread G1/2 RHi, Outlet: internal thread G1/2 RHi, Working pressure gauge: 0 - 16/10 bar axial, Width x Height x Depth: 90 x 180 x 90 mm<br />• Outlet: internal thread G1/2 RHi, Working pressure gauge: 0 - 16/10 bar axial, Width x Height x Depth: 90 x 180 x 90 mm<br /><br />Dimensions:<br /><br />Width x Height x Depth: 90 x 180 x 90 mm
6688 Line pressure reducer Vulkan LH25/10 oxygen 0.5 - 10 bar with safety pressure gauge ISO 5171, Max. inlet pressure: 40 bar<br />Technical data:<br /><br />• Outlet pressure: 0<br />• output: 180 Nm?/h compressed air at 10 bar outlet pressure, Inlet: Internal thread G1RH, Outlet: Internal thread G1RH, Output pressure gauge: 0-16/10 axial, Width x Height x Depth: 200 x 210 x 120 mm<br />• Inlet: Internal thread G1RH, Outlet: Internal thread G1RH, Output pressure gauge: 0-16/10 axial, Width x Height x Depth: 200 x 210 x 120 mm<br />• Outlet: Internal thread G1RH, Output pressure gauge: 0-16/10 axial, Width x Height x Depth: 200 x 210 x 120 mm<br /><br />Dimensions:<br /><br />Width x Height x Depth: 200 x 210 x 120 mm
6689 Line pressure reducer Vulkan LH25/10 oxygen 0.5 - 10 bar with safety pressure gauge ISO 5171, Max. inlet pressure: 40 bar<br />Technical data:<br /><br />• Outlet pressure: 0<br />• output: 180 Nm?/h compressed air at 10 bar outlet pressure, Inlet: Internal thread G1RH, Outlet: Internal thread G1RH, Output pressure gauge: 0-16/10 axial, Width x Height x Depth: 200 x 210 x 120 mm<br />• Inlet: Internal thread G1RH, Outlet: Internal thread G1RH, Output pressure gauge: 0-16/10 axial, Width x Height x Depth: 200 x 210 x 120 mm<br />• Outlet: Internal thread G1RH, Output pressure gauge: 0-16/10 axial, Width x Height x Depth: 200 x 210 x 120 mm<br /><br />Dimensions:<br /><br />Width x Height x Depth: 200 x 210 x 120 mm
6694 Line pressure reducer Vulkan LH25/10 oxygen 0.5 - 10 bar with safety pressure gauge ISO 5171, Max. inlet pressure: 40 bar<br />Technical data:<br /><br />• Outlet pressure: 0<br />• output: 180 Nm?/h compressed air at 10 bar outlet pressure, Inlet: Internal thread G1RH, Outlet: Internal thread G1RH, Output pressure gauge: 0-16/10 axial, Width x Height x Depth: 200 x 210 x 120 mm<br />• Inlet: Internal thread G1RH, Outlet: Internal thread G1RH, Output pressure gauge: 0-16/10 axial, Width x Height x Depth: 200 x 210 x 120 mm<br />• Outlet: Internal thread G1RH, Output pressure gauge: 0-16/10 axial, Width x Height x Depth: 200 x 210 x 120 mm<br /><br />Dimensions:<br /><br />Width x Height x Depth: 200 x 210 x 120 mm
6699 Vulkan LH40 line pressure reducer nitrogen G1/2RHi both sides 0.5 - 16 bar with safety pressure gauge<br />Standards & Design:<br /><br />according to DIN EN ISO 5171, Inlet pressure: max<br /><br />Technical data:<br /><br />• Outlet pressure: 0<br />• output: 150 Nm³/h air at 16 bar outlet pressure<br />• Inlet: internal thread G1/2 RHi, Outlet: internal thread G1/2 RHi, Working pressure gauge: 0 - 16/10 bar axial, Width x Height x Depth: 90 x 180 x 90 mm<br />• Outlet: internal thread G1/2 RHi, Working pressure gauge: 0 - 16/10 bar axial, Width x Height x Depth: 90 x 180 x 90 mm<br /><br />Dimensions:<br /><br />Width x Height x Depth: 90 x 180 x 90 mm
6702 Line pressure reducer Vulkan LH25/10 oxygen 0.5 - 10 bar with safety pressure gauge ISO 5171, Max. inlet pressure: 40 bar<br />Technical data:<br /><br />• Outlet pressure: 0<br />• output: 180 Nm?/h compressed air at 10 bar outlet pressure, Inlet: Internal thread G1RH, Outlet: Internal thread G1RH, Output pressure gauge: 0-16/10 axial, Width x Height x Depth: 200 x 210 x 120 mm<br />• Inlet: Internal thread G1RH, Outlet: Internal thread G1RH, Output pressure gauge: 0-16/10 axial, Width x Height x Depth: 200 x 210 x 120 mm<br />• Outlet: Internal thread G1RH, Output pressure gauge: 0-16/10 axial, Width x Height x Depth: 200 x 210 x 120 mm<br /><br />Dimensions:<br /><br />Width x Height x Depth: 200 x 210 x 120 mm
6706 Line pressure reducer Vulkan LH25/10 oxygen 0.5 - 10 bar with safety pressure gauge ISO 5171, Max. inlet pressure: 40 bar<br />Technical data:<br /><br />• Outlet pressure: 0<br />• output: 180 Nm?/h compressed air at 10 bar outlet pressure, Inlet: Internal thread G1RH, Outlet: Internal thread G1RH, Output pressure gauge: 0-16/10 axial, Width x Height x Depth: 200 x 210 x 120 mm<br />• Inlet: Internal thread G1RH, Outlet: Internal thread G1RH, Output pressure gauge: 0-16/10 axial, Width x Height x Depth: 200 x 210 x 120 mm<br />• Outlet: Internal thread G1RH, Output pressure gauge: 0-16/10 axial, Width x Height x Depth: 200 x 210 x 120 mm<br /><br />Dimensions:<br /><br />Width x Height x Depth: 200 x 210 x 120 mm
6708 Line pressure reducer Vulkan LH25/10 oxygen 0.5 - 10 bar with safety pressure gauge ISO 5171, Max. inlet pressure: 40 bar<br />Technical data:<br /><br />• Outlet pressure: 0<br />• output: 180 Nm?/h compressed air at 10 bar outlet pressure, Inlet: Internal thread G1RH, Outlet: Internal thread G1RH, Output pressure gauge: 0-16/10 axial, Width x Height x Depth: 200 x 210 x 120 mm<br />• Inlet: Internal thread G1RH, Outlet: Internal thread G1RH, Output pressure gauge: 0-16/10 axial, Width x Height x Depth: 200 x 210 x 120 mm<br />• Outlet: Internal thread G1RH, Output pressure gauge: 0-16/10 axial, Width x Height x Depth: 200 x 210 x 120 mm<br /><br />Dimensions:<br /><br />Width x Height x Depth: 200 x 210 x 120 mm
6725 Tapping Points: Pressure Reducer Vulkan E10F Flowmeter LabLine Forming Gas 34 Nl/min. Completely chrome-plated with metal diaphragms for gas purity 5.0, based on ISO 2503<br />Standards & Design:<br /><br />Class 20<br />single-stage design, with flowmeter for monitoring the exact flow rate in Nl/min<br />according to DIN EN 560<br /><br />Technical data:<br /><br />• Maximum inlet pressure: 20 bar<br />• Output pressure: 4<br />• Inlet: G 3/8 LHk U-nut according to DIN EN 560<br />• Outlet: 6mm double clamp ring, stainless steel<br /><br />Dimensions:<br /><br />Width x Height x Depth: 120 x 210 x 65 mm
6726 Tapping Points: Pressure Reducer Vulkan E10F Flowmeter LabLine Forming Gas 34 Nl/min. Completely chrome-plated with metal diaphragms for gas purity 5.0, based on ISO 2503<br />Standards & Design:<br /><br />Class 20<br />single-stage design, with flowmeter for monitoring the exact flow rate in Nl/min<br />according to DIN EN 560<br /><br />Technical data:<br /><br />• Maximum inlet pressure: 20 bar<br />• Output pressure: 4<br />• Inlet: G 3/8 LHk U-nut according to DIN EN 560<br />• Outlet: 6mm double clamp ring, stainless steel<br /><br />Dimensions:<br /><br />Width x Height x Depth: 120 x 210 x 65 mm