SELECT 
  cscart_product_descriptions.product_id, 
  cscart_product_descriptions.short_description, 
  IF(
    cscart_product_descriptions.short_description = '' 
    OR cscart_product_descriptions.short_description IS NULL, 
    cscart_product_descriptions.full_description, 
    ''
  ) AS full_description, 
  cscart_product_descriptions.meta_keywords, 
  cscart_product_descriptions.meta_description, 
  cscart_product_descriptions.search_words, 
  cscart_product_descriptions.promo_text, 
  cscart_product_descriptions.unit_name 
FROM 
  cscart_product_descriptions 
WHERE 
  cscart_product_descriptions.product_id IN (
    3773, 3774, 3775, 3776, 3777, 1143, 1139, 
    1140, 1141, 1142, 3681, 3682, 3683, 
    3684, 3685, 2207, 2208, 2209, 2210, 
    2211, 2212, 2213, 2214, 2215, 2216, 
    5808, 5809, 5810, 5811, 5812, 5813, 
    5814, 5815, 5816, 1654, 1655, 1656, 
    1657, 1658, 1659, 1660, 1661, 1662, 
    1663, 1664, 1665, 1666, 1667, 1668, 
    1669, 1670, 1671, 2220, 2221, 2222, 
    2223, 5353, 5354, 5355, 5356, 5357, 
    5358, 5359, 5360, 5361, 5362, 5363, 
    5364, 5365, 5366, 5367, 5368, 5369, 
    5370, 5820, 5821, 5822, 5823, 12916, 
    12921, 12876, 12896, 12900, 12909
  ) 
  AND cscart_product_descriptions.lang_code = 'en'

Query time 0.00200

JSON explain

{
  "query_block": {
    "select_id": 1,
    "cost_info": {
      "query_cost": "84.86"
    },
    "table": {
      "table_name": "cscart_product_descriptions",
      "access_type": "range",
      "possible_keys": [
        "PRIMARY",
        "product_id"
      ],
      "key": "PRIMARY",
      "used_key_parts": [
        "product_id",
        "lang_code"
      ],
      "key_length": "9",
      "rows_examined_per_scan": 84,
      "rows_produced_per_join": 84,
      "filtered": "100.00",
      "index_condition": "((`test2_gaseus`.`cscart_product_descriptions`.`product_id` in (3773,3774,3775,3776,3777,1143,1139,1140,1141,1142,3681,3682,3683,3684,3685,2207,2208,2209,2210,2211,2212,2213,2214,2215,2216,5808,5809,5810,5811,5812,5813,5814,5815,5816,1654,1655,1656,1657,1658,1659,1660,1661,1662,1663,1664,1665,1666,1667,1668,1669,1670,1671,2220,2221,2222,2223,5353,5354,5355,5356,5357,5358,5359,5360,5361,5362,5363,5364,5365,5366,5367,5368,5369,5370,5820,5821,5822,5823,12916,12921,12876,12896,12900,12909)) and (`test2_gaseus`.`cscart_product_descriptions`.`lang_code` = 'en'))",
      "cost_info": {
        "read_cost": "76.46",
        "eval_cost": "8.40",
        "prefix_cost": "84.86",
        "data_read_per_join": "383K"
      },
      "used_columns": [
        "product_id",
        "lang_code",
        "short_description",
        "full_description",
        "meta_keywords",
        "meta_description",
        "search_words",
        "promo_text",
        "unit_name"
      ]
    }
  }
}

Result

product_id short_description full_description meta_keywords meta_description search_words promo_text unit_name
1139 EH40-35MM Nitrogen 5.0 tapping point pressure reducer, 0.5 - 35 bar, with metal diaphragm for gas purity 5.0, and safety gauge according to ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 35 bar, adjustable. Maximum output: 230 Nm³/h air at 35 bar outlet pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 60/40 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: for pure gases up to gas purity 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberOutlet connection 1135303505 G1/2 RHak according to EN 560 1135303505-812 Hose nozzle G3/8" RHk x 9mm 1135303505-800 External thread G1/4" RHk according to EN560 1135303505-870 External thread G3/8" RHk according to EN 560 1135303505-838 External thread G1/2" RHk according to EN 560 1135303505-6M Compression fitting VA 6mm 1135303505-8M Compression fitting VA 8mm 1135303505-10M Compression fitting VA 10mm 1135303505-12M Compression fitting VA 12mm 1135303505-2 Compression fitting VA 1/8" 1135303505-4 Compression fitting VA 1/4"
1140 EH40-35MM Nitrogen 5.0 tapping point pressure reducer, 0.5 - 35 bar, with metal diaphragm for gas purity 5.0, and safety gauge according to ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 35 bar, adjustable. Maximum output: 230 Nm³/h air at 35 bar outlet pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 60/40 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: for pure gases up to gas purity 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberOutlet connection 1135303505 G1/2 RHak according to EN 560 1135303505-812 Hose nozzle G3/8" RHk x 9mm 1135303505-800 External thread G1/4" RHk according to EN560 1135303505-870 External thread G3/8" RHk according to EN 560 1135303505-838 External thread G1/2" RHk according to EN 560 1135303505-6M Compression fitting VA 6mm 1135303505-8M Compression fitting VA 8mm 1135303505-10M Compression fitting VA 10mm 1135303505-12M Compression fitting VA 12mm 1135303505-2 Compression fitting VA 1/8" 1135303505-4 Compression fitting VA 1/4"
1141 EH40-35MM Nitrogen 5.0 tapping point pressure reducer, 0.5 - 35 bar, with metal diaphragm for gas purity 5.0, and safety gauge according to ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 35 bar, adjustable. Maximum output: 230 Nm³/h air at 35 bar outlet pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 60/40 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: for pure gases up to gas purity 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberOutlet connection 1135303505 G1/2 RHak according to EN 560 1135303505-812 Hose nozzle G3/8" RHk x 9mm 1135303505-800 External thread G1/4" RHk according to EN560 1135303505-870 External thread G3/8" RHk according to EN 560 1135303505-838 External thread G1/2" RHk according to EN 560 1135303505-6M Compression fitting VA 6mm 1135303505-8M Compression fitting VA 8mm 1135303505-10M Compression fitting VA 10mm 1135303505-12M Compression fitting VA 12mm 1135303505-2 Compression fitting VA 1/8" 1135303505-4 Compression fitting VA 1/4"
1142 EH40-35MM Nitrogen 5.0 tapping point pressure reducer, 0.5 - 35 bar, with metal diaphragm for gas purity 5.0, and safety gauge according to ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 35 bar, adjustable. Maximum output: 230 Nm³/h air at 35 bar outlet pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 60/40 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: for pure gases up to gas purity 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberOutlet connection 1135303505 G1/2 RHak according to EN 560 1135303505-812 Hose nozzle G3/8" RHk x 9mm 1135303505-800 External thread G1/4" RHk according to EN560 1135303505-870 External thread G3/8" RHk according to EN 560 1135303505-838 External thread G1/2" RHk according to EN 560 1135303505-6M Compression fitting VA 6mm 1135303505-8M Compression fitting VA 8mm 1135303505-10M Compression fitting VA 10mm 1135303505-12M Compression fitting VA 12mm 1135303505-2 Compression fitting VA 1/8" 1135303505-4 Compression fitting VA 1/4"
1143 EH40-35MM Nitrogen 5.0 tapping point pressure reducer, 0.5 - 35 bar, with metal diaphragm for gas purity 5.0, and safety gauge according to ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 35 bar, adjustable. Maximum output: 230 Nm³/h air at 35 bar outlet pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 60/40 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: for pure gases up to gas purity 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberOutlet connection 1135303505 G1/2 RHak according to EN 560 1135303505-812 Hose nozzle G3/8" RHk x 9mm 1135303505-800 External thread G1/4" RHk according to EN560 1135303505-870 External thread G3/8" RHk according to EN 560 1135303505-838 External thread G1/2" RHk according to EN 560 1135303505-6M Compression fitting VA 6mm 1135303505-8M Compression fitting VA 8mm 1135303505-10M Compression fitting VA 10mm 1135303505-12M Compression fitting VA 12mm 1135303505-2 Compression fitting VA 1/8" 1135303505-4 Compression fitting VA 1/4"
1654 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
1655 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
1656 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
1657 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
1658 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
1659 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
1660 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
1661 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
1662 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
1663 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
1664 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
1665 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
1666 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
1667 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
1668 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
1669 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
1670 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
1671 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
2207 Tapping point pressure reducer Vulkan E10 F Flowmeter Hydrogen 3-34 Nl/min based on ISO 2503, Class 10, single-stage design, with flowmeter to control the exact flow rate in Nl/min for perfect gas shielded welding, max. inlet pressure: 20 bar, outlet pressure: 4.5 bar, fixed output: max. 3-34 Nl/min. Hydrogen adjustable. Inlet: G 3/8 LH U-nut according to DIN EN 560. Outlet: G 3/8 LH x 9mm nozzle according to DIN EN 560. Width x Height x Depth: 120 x 210 x 65 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541). Special outlet fitting: Standard: - hose nozzle G 3/8" LHk x 9mm. Options (surcharge): Order number: Gas purity/membrane. Outlet fitting 104906 for technical gases up to 4.5, with standard membrane. Hose nozzle G 3/8" LHk x 9mm. 104906-815 for technical gases up to 4.5, with standard membrane hose nozzle G3/8" LHk x 6mm 104906-814 for technical gases up to 4.5, with standard membrane external thread G3/8" LHk according to EN 560 104906-830 for technical gases up to 4.5, with standard membrane external thread G1/2" LHk according to EN 560 104906-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 104906-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 104906-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 104906-12M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 12mm 104906-2 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/8" 104906-4 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/4" 104906-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 104906-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 104906-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 104906-MM-830 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" LHk according to EN 560 104906-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 104906-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 104906-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 104906-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 104906-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 104906-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2208 Tapping point pressure reducer Vulkan E10 F Flowmeter Hydrogen 3-34 Nl/min based on ISO 2503, Class 10, single-stage design, with flowmeter to control the exact flow rate in Nl/min for perfect gas shielded welding, max. inlet pressure: 20 bar, outlet pressure: 4.5 bar, fixed output: max. 3-34 Nl/min. Hydrogen adjustable. Inlet: G 3/8 LH U-nut according to DIN EN 560. Outlet: G 3/8 LH x 9mm nozzle according to DIN EN 560. Width x Height x Depth: 120 x 210 x 65 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541). Special outlet fitting: Standard: - hose nozzle G 3/8" LHk x 9mm. Options (surcharge): Order number: Gas purity/membrane. Outlet fitting 104906 for technical gases up to 4.5, with standard membrane. Hose nozzle G 3/8" LHk x 9mm. 104906-815 for technical gases up to 4.5, with standard membrane hose nozzle G3/8" LHk x 6mm 104906-814 for technical gases up to 4.5, with standard membrane external thread G3/8" LHk according to EN 560 104906-830 for technical gases up to 4.5, with standard membrane external thread G1/2" LHk according to EN 560 104906-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 104906-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 104906-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 104906-12M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 12mm 104906-2 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/8" 104906-4 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/4" 104906-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 104906-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 104906-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 104906-MM-830 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" LHk according to EN 560 104906-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 104906-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 104906-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 104906-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 104906-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 104906-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2209 Tapping point pressure reducer Vulkan E10 F Flowmeter Hydrogen 3-34 Nl/min based on ISO 2503, Class 10, single-stage design, with flowmeter to control the exact flow rate in Nl/min for perfect gas shielded welding, max. inlet pressure: 20 bar, outlet pressure: 4.5 bar, fixed output: max. 3-34 Nl/min. Hydrogen adjustable. Inlet: G 3/8 LH U-nut according to DIN EN 560. Outlet: G 3/8 LH x 9mm nozzle according to DIN EN 560. Width x Height x Depth: 120 x 210 x 65 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541). Special outlet fitting: Standard: - hose nozzle G 3/8" LHk x 9mm. Options (surcharge): Order number: Gas purity/membrane. Outlet fitting 104906 for technical gases up to 4.5, with standard membrane. Hose nozzle G 3/8" LHk x 9mm. 104906-815 for technical gases up to 4.5, with standard membrane hose nozzle G3/8" LHk x 6mm 104906-814 for technical gases up to 4.5, with standard membrane external thread G3/8" LHk according to EN 560 104906-830 for technical gases up to 4.5, with standard membrane external thread G1/2" LHk according to EN 560 104906-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 104906-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 104906-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 104906-12M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 12mm 104906-2 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/8" 104906-4 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/4" 104906-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 104906-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 104906-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 104906-MM-830 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" LHk according to EN 560 104906-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 104906-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 104906-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 104906-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 104906-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 104906-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2210 Tapping point pressure reducer Vulkan E10 F Flowmeter Hydrogen 3-34 Nl/min based on ISO 2503, Class 10, single-stage design, with flowmeter to control the exact flow rate in Nl/min for perfect gas shielded welding, max. inlet pressure: 20 bar, outlet pressure: 4.5 bar, fixed output: max. 3-34 Nl/min. Hydrogen adjustable. Inlet: G 3/8 LH U-nut according to DIN EN 560. Outlet: G 3/8 LH x 9mm nozzle according to DIN EN 560. Width x Height x Depth: 120 x 210 x 65 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541). Special outlet fitting: Standard: - hose nozzle G 3/8" LHk x 9mm. Options (surcharge): Order number: Gas purity/membrane. Outlet fitting 104906 for technical gases up to 4.5, with standard membrane. Hose nozzle G 3/8" LHk x 9mm. 104906-815 for technical gases up to 4.5, with standard membrane hose nozzle G3/8" LHk x 6mm 104906-814 for technical gases up to 4.5, with standard membrane external thread G3/8" LHk according to EN 560 104906-830 for technical gases up to 4.5, with standard membrane external thread G1/2" LHk according to EN 560 104906-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 104906-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 104906-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 104906-12M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 12mm 104906-2 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/8" 104906-4 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/4" 104906-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 104906-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 104906-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 104906-MM-830 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" LHk according to EN 560 104906-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 104906-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 104906-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 104906-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 104906-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 104906-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2211 Tapping point pressure reducer Vulkan E10 F Flowmeter Hydrogen 3-34 Nl/min based on ISO 2503, Class 10, single-stage design, with flowmeter to control the exact flow rate in Nl/min for perfect gas shielded welding, max. inlet pressure: 20 bar, outlet pressure: 4.5 bar, fixed output: max. 3-34 Nl/min. Hydrogen adjustable. Inlet: G 3/8 LH U-nut according to DIN EN 560. Outlet: G 3/8 LH x 9mm nozzle according to DIN EN 560. Width x Height x Depth: 120 x 210 x 65 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541). Special outlet fitting: Standard: - hose nozzle G 3/8" LHk x 9mm. Options (surcharge): Order number: Gas purity/membrane. Outlet fitting 104906 for technical gases up to 4.5, with standard membrane. Hose nozzle G 3/8" LHk x 9mm. 104906-815 for technical gases up to 4.5, with standard membrane hose nozzle G3/8" LHk x 6mm 104906-814 for technical gases up to 4.5, with standard membrane external thread G3/8" LHk according to EN 560 104906-830 for technical gases up to 4.5, with standard membrane external thread G1/2" LHk according to EN 560 104906-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 104906-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 104906-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 104906-12M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 12mm 104906-2 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/8" 104906-4 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/4" 104906-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 104906-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 104906-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 104906-MM-830 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" LHk according to EN 560 104906-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 104906-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 104906-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 104906-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 104906-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 104906-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2212 Tapping point pressure reducer Vulkan E10 F Flowmeter Hydrogen 3-34 Nl/min based on ISO 2503, Class 10, single-stage design, with flowmeter to control the exact flow rate in Nl/min for perfect gas shielded welding, max. inlet pressure: 20 bar, outlet pressure: 4.5 bar, fixed output: max. 3-34 Nl/min. Hydrogen adjustable. Inlet: G 3/8 LH U-nut according to DIN EN 560. Outlet: G 3/8 LH x 9mm nozzle according to DIN EN 560. Width x Height x Depth: 120 x 210 x 65 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541). Special outlet fitting: Standard: - hose nozzle G 3/8" LHk x 9mm. Options (surcharge): Order number: Gas purity/membrane. Outlet fitting 104906 for technical gases up to 4.5, with standard membrane. Hose nozzle G 3/8" LHk x 9mm. 104906-815 for technical gases up to 4.5, with standard membrane hose nozzle G3/8" LHk x 6mm 104906-814 for technical gases up to 4.5, with standard membrane external thread G3/8" LHk according to EN 560 104906-830 for technical gases up to 4.5, with standard membrane external thread G1/2" LHk according to EN 560 104906-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 104906-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 104906-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 104906-12M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 12mm 104906-2 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/8" 104906-4 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/4" 104906-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 104906-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 104906-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 104906-MM-830 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" LHk according to EN 560 104906-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 104906-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 104906-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 104906-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 104906-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 104906-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2213 Tapping point pressure reducer Vulkan E10 F Flowmeter Hydrogen 3-34 Nl/min based on ISO 2503, Class 10, single-stage design, with flowmeter to control the exact flow rate in Nl/min for perfect gas shielded welding, max. inlet pressure: 20 bar, outlet pressure: 4.5 bar, fixed output: max. 3-34 Nl/min. Hydrogen adjustable. Inlet: G 3/8 LH U-nut according to DIN EN 560. Outlet: G 3/8 LH x 9mm nozzle according to DIN EN 560. Width x Height x Depth: 120 x 210 x 65 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541). Special outlet fitting: Standard: - hose nozzle G 3/8" LHk x 9mm. Options (surcharge): Order number: Gas purity/membrane. Outlet fitting 104906 for technical gases up to 4.5, with standard membrane. Hose nozzle G 3/8" LHk x 9mm. 104906-815 for technical gases up to 4.5, with standard membrane hose nozzle G3/8" LHk x 6mm 104906-814 for technical gases up to 4.5, with standard membrane external thread G3/8" LHk according to EN 560 104906-830 for technical gases up to 4.5, with standard membrane external thread G1/2" LHk according to EN 560 104906-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 104906-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 104906-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 104906-12M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 12mm 104906-2 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/8" 104906-4 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/4" 104906-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 104906-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 104906-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 104906-MM-830 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" LHk according to EN 560 104906-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 104906-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 104906-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 104906-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 104906-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 104906-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2214 Tapping point pressure reducer Vulkan E10 F Flowmeter Hydrogen 3-34 Nl/min based on ISO 2503, Class 10, single-stage design, with flowmeter to control the exact flow rate in Nl/min for perfect gas shielded welding, max. inlet pressure: 20 bar, outlet pressure: 4.5 bar, fixed output: max. 3-34 Nl/min. Hydrogen adjustable. Inlet: G 3/8 LH U-nut according to DIN EN 560. Outlet: G 3/8 LH x 9mm nozzle according to DIN EN 560. Width x Height x Depth: 120 x 210 x 65 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541). Special outlet fitting: Standard: - hose nozzle G 3/8" LHk x 9mm. Options (surcharge): Order number: Gas purity/membrane. Outlet fitting 104906 for technical gases up to 4.5, with standard membrane. Hose nozzle G 3/8" LHk x 9mm. 104906-815 for technical gases up to 4.5, with standard membrane hose nozzle G3/8" LHk x 6mm 104906-814 for technical gases up to 4.5, with standard membrane external thread G3/8" LHk according to EN 560 104906-830 for technical gases up to 4.5, with standard membrane external thread G1/2" LHk according to EN 560 104906-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 104906-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 104906-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 104906-12M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 12mm 104906-2 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/8" 104906-4 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/4" 104906-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 104906-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 104906-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 104906-MM-830 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" LHk according to EN 560 104906-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 104906-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 104906-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 104906-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 104906-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 104906-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2215 Tapping point pressure reducer Vulkan E10 F Flowmeter Hydrogen 3-34 Nl/min based on ISO 2503, Class 10, single-stage design, with flowmeter to control the exact flow rate in Nl/min for perfect gas shielded welding, max. inlet pressure: 20 bar, outlet pressure: 4.5 bar, fixed output: max. 3-34 Nl/min. Hydrogen adjustable. Inlet: G 3/8 LH U-nut according to DIN EN 560. Outlet: G 3/8 LH x 9mm nozzle according to DIN EN 560. Width x Height x Depth: 120 x 210 x 65 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541). Special outlet fitting: Standard: - hose nozzle G 3/8" LHk x 9mm. Options (surcharge): Order number: Gas purity/membrane. Outlet fitting 104906 for technical gases up to 4.5, with standard membrane. Hose nozzle G 3/8" LHk x 9mm. 104906-815 for technical gases up to 4.5, with standard membrane hose nozzle G3/8" LHk x 6mm 104906-814 for technical gases up to 4.5, with standard membrane external thread G3/8" LHk according to EN 560 104906-830 for technical gases up to 4.5, with standard membrane external thread G1/2" LHk according to EN 560 104906-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 104906-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 104906-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 104906-12M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 12mm 104906-2 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/8" 104906-4 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/4" 104906-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 104906-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 104906-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 104906-MM-830 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" LHk according to EN 560 104906-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 104906-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 104906-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 104906-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 104906-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 104906-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2216 Tapping point pressure reducer Vulkan E10 F Flowmeter Hydrogen 3-34 Nl/min based on ISO 2503, Class 10, single-stage design, with flowmeter to control the exact flow rate in Nl/min for perfect gas shielded welding, max. inlet pressure: 20 bar, outlet pressure: 4.5 bar, fixed output: max. 3-34 Nl/min. Hydrogen adjustable. Inlet: G 3/8 LH U-nut according to DIN EN 560. Outlet: G 3/8 LH x 9mm nozzle according to DIN EN 560. Width x Height x Depth: 120 x 210 x 65 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541). Special outlet fitting: Standard: - hose nozzle G 3/8" LHk x 9mm. Options (surcharge): Order number: Gas purity/membrane. Outlet fitting 104906 for technical gases up to 4.5, with standard membrane. Hose nozzle G 3/8" LHk x 9mm. 104906-815 for technical gases up to 4.5, with standard membrane hose nozzle G3/8" LHk x 6mm 104906-814 for technical gases up to 4.5, with standard membrane external thread G3/8" LHk according to EN 560 104906-830 for technical gases up to 4.5, with standard membrane external thread G1/2" LHk according to EN 560 104906-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 104906-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 104906-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 104906-12M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 12mm 104906-2 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/8" 104906-4 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/4" 104906-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 104906-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 104906-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 104906-MM-830 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" LHk according to EN 560 104906-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 104906-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 104906-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 104906-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 104906-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 104906-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2220 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
2221 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
2222 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
2223 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
3681 EH40-35MM Nitrogen 5.0 tapping point pressure reducer, 0.5 - 35 bar, with metal diaphragm for gas purity 5.0, and safety gauge according to ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 35 bar, adjustable. Maximum output: 230 Nm³/h air at 35 bar outlet pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 60/40 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: for pure gases up to gas purity 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberOutlet connection 1135303505 G1/2 RHak according to EN 560 1135303505-812 Hose nozzle G3/8" RHk x 9mm 1135303505-800 External thread G1/4" RHk according to EN560 1135303505-870 External thread G3/8" RHk according to EN 560 1135303505-838 External thread G1/2" RHk according to EN 560 1135303505-6M Compression fitting VA 6mm 1135303505-8M Compression fitting VA 8mm 1135303505-10M Compression fitting VA 10mm 1135303505-12M Compression fitting VA 12mm 1135303505-2 Compression fitting VA 1/8" 1135303505-4 Compression fitting VA 1/4"
3682 EH40-35MM Nitrogen 5.0 tapping point pressure reducer, 0.5 - 35 bar, with metal diaphragm for gas purity 5.0, and safety gauge according to ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 35 bar, adjustable. Maximum output: 230 Nm³/h air at 35 bar outlet pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 60/40 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: for pure gases up to gas purity 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberOutlet connection 1135303505 G1/2 RHak according to EN 560 1135303505-812 Hose nozzle G3/8" RHk x 9mm 1135303505-800 External thread G1/4" RHk according to EN560 1135303505-870 External thread G3/8" RHk according to EN 560 1135303505-838 External thread G1/2" RHk according to EN 560 1135303505-6M Compression fitting VA 6mm 1135303505-8M Compression fitting VA 8mm 1135303505-10M Compression fitting VA 10mm 1135303505-12M Compression fitting VA 12mm 1135303505-2 Compression fitting VA 1/8" 1135303505-4 Compression fitting VA 1/4"
3683 EH40-35MM Nitrogen 5.0 tapping point pressure reducer, 0.5 - 35 bar, with metal diaphragm for gas purity 5.0, and safety gauge according to ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 35 bar, adjustable. Maximum output: 230 Nm³/h air at 35 bar outlet pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 60/40 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: for pure gases up to gas purity 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberOutlet connection 1135303505 G1/2 RHak according to EN 560 1135303505-812 Hose nozzle G3/8" RHk x 9mm 1135303505-800 External thread G1/4" RHk according to EN560 1135303505-870 External thread G3/8" RHk according to EN 560 1135303505-838 External thread G1/2" RHk according to EN 560 1135303505-6M Compression fitting VA 6mm 1135303505-8M Compression fitting VA 8mm 1135303505-10M Compression fitting VA 10mm 1135303505-12M Compression fitting VA 12mm 1135303505-2 Compression fitting VA 1/8" 1135303505-4 Compression fitting VA 1/4"
3684 EH40-35MM Nitrogen 5.0 tapping point pressure reducer, 0.5 - 35 bar, with metal diaphragm for gas purity 5.0, and safety gauge according to ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 35 bar, adjustable. Maximum output: 230 Nm³/h air at 35 bar outlet pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 60/40 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: for pure gases up to gas purity 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberOutlet connection 1135303505 G1/2 RHak according to EN 560 1135303505-812 Hose nozzle G3/8" RHk x 9mm 1135303505-800 External thread G1/4" RHk according to EN560 1135303505-870 External thread G3/8" RHk according to EN 560 1135303505-838 External thread G1/2" RHk according to EN 560 1135303505-6M Compression fitting VA 6mm 1135303505-8M Compression fitting VA 8mm 1135303505-10M Compression fitting VA 10mm 1135303505-12M Compression fitting VA 12mm 1135303505-2 Compression fitting VA 1/8" 1135303505-4 Compression fitting VA 1/4"
3685 EH40-35MM Nitrogen 5.0 tapping point pressure reducer, 0.5 - 35 bar, with metal diaphragm for gas purity 5.0, and safety gauge according to ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 35 bar, adjustable. Maximum output: 230 Nm³/h air at 35 bar outlet pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 60/40 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: for pure gases up to gas purity 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberOutlet connection 1135303505 G1/2 RHak according to EN 560 1135303505-812 Hose nozzle G3/8" RHk x 9mm 1135303505-800 External thread G1/4" RHk according to EN560 1135303505-870 External thread G3/8" RHk according to EN 560 1135303505-838 External thread G1/2" RHk according to EN 560 1135303505-6M Compression fitting VA 6mm 1135303505-8M Compression fitting VA 8mm 1135303505-10M Compression fitting VA 10mm 1135303505-12M Compression fitting VA 12mm 1135303505-2 Compression fitting VA 1/8" 1135303505-4 Compression fitting VA 1/4"
3773 Pressure reducer EH40-35 Oxygen 0.5 - 35 bar with safety pressure gauge according to ISO 5171, with metal diaphragm. Inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 35 bar adjustable. Maximum output: 230 Nm³/h air at 35 bar outlet pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 60/40 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel diaphragm SS321. (1.4541) Special outlet screw connection: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) Internal thread G1/2" RHi on both sides 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) Compression fitting VA 6mm on both sides 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) Compression fitting VA 8mm on both sides 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) both sides compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) both sides compression fitting VA 12mm 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) both sides compression fitting VA 15mm 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) both sides compression fitting VA 18mm
3774 Pressure reducer EH40-35 Oxygen 0.5 - 35 bar with safety pressure gauge according to ISO 5171, with metal diaphragm. Inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 35 bar adjustable. Maximum output: 230 Nm³/h air at 35 bar outlet pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 60/40 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel diaphragm SS321. (1.4541) Special outlet screw connection: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) Internal thread G1/2" RHi on both sides 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) Compression fitting VA 6mm on both sides 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) Compression fitting VA 8mm on both sides 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) both sides compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) both sides compression fitting VA 12mm 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) both sides compression fitting VA 15mm 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) both sides compression fitting VA 18mm
3775 Pressure reducer EH40-35 Oxygen 0.5 - 35 bar with safety pressure gauge according to ISO 5171, with metal diaphragm. Inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 35 bar adjustable. Maximum output: 230 Nm³/h air at 35 bar outlet pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 60/40 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel diaphragm SS321. (1.4541) Special outlet screw connection: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) Internal thread G1/2" RHi on both sides 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) Compression fitting VA 6mm on both sides 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) Compression fitting VA 8mm on both sides 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) both sides compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) both sides compression fitting VA 12mm 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) both sides compression fitting VA 15mm 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) both sides compression fitting VA 18mm
3776 Pressure reducer EH40-35 Oxygen 0.5 - 35 bar with safety pressure gauge according to ISO 5171, with metal diaphragm. Inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 35 bar adjustable. Maximum output: 230 Nm³/h air at 35 bar outlet pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 60/40 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel diaphragm SS321. (1.4541) Special outlet screw connection: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) Internal thread G1/2" RHi on both sides 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) Compression fitting VA 6mm on both sides 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) Compression fitting VA 8mm on both sides 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) both sides compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) both sides compression fitting VA 12mm 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) both sides compression fitting VA 15mm 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) both sides compression fitting VA 18mm
3777 Pressure reducer EH40-35 Oxygen 0.5 - 35 bar with safety pressure gauge according to ISO 5171, with metal diaphragm. Inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 35 bar adjustable. Maximum output: 230 Nm³/h air at 35 bar outlet pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 60/40 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel diaphragm SS321. (1.4541) Special outlet screw connection: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) Internal thread G1/2" RHi on both sides 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) Compression fitting VA 6mm on both sides 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) Compression fitting VA 8mm on both sides 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) both sides compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) both sides compression fitting VA 12mm 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) both sides compression fitting VA 15mm 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) both sides compression fitting VA 18mm
5353 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
5354 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
5355 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
5356 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
5357 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
5358 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
5359 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
5360 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
5361 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
5362 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
5363 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
5364 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
5365 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
5366 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
5367 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
5368 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
5369 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
5370 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
5808 Tapping point pressure reducer Vulkan E10 F Flowmeter Hydrogen 3-34 Nl/min based on ISO 2503, Class 10, single-stage design, with flowmeter to control the exact flow rate in Nl/min for perfect gas shielded welding, max. inlet pressure: 20 bar, outlet pressure: 4.5 bar, fixed output: max. 3-34 Nl/min. Hydrogen adjustable. Inlet: G 3/8 LH U-nut according to DIN EN 560. Outlet: G 3/8 LH x 9mm nozzle according to DIN EN 560. Width x Height x Depth: 120 x 210 x 65 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541). Special outlet fitting: Standard: - hose nozzle G 3/8" LHk x 9mm. Options (surcharge): Order number: Gas purity/membrane. Outlet fitting 104906 for technical gases up to 4.5, with standard membrane. Hose nozzle G 3/8" LHk x 9mm. 104906-815 for technical gases up to 4.5, with standard membrane hose nozzle G3/8" LHk x 6mm 104906-814 for technical gases up to 4.5, with standard membrane external thread G3/8" LHk according to EN 560 104906-830 for technical gases up to 4.5, with standard membrane external thread G1/2" LHk according to EN 560 104906-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 104906-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 104906-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 104906-12M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 12mm 104906-2 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/8" 104906-4 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/4" 104906-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 104906-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 104906-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 104906-MM-830 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" LHk according to EN 560 104906-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 104906-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 104906-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 104906-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 104906-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 104906-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
5809 Tapping point pressure reducer Vulkan E10 F Flowmeter Hydrogen 3-34 Nl/min based on ISO 2503, Class 10, single-stage design, with flowmeter to control the exact flow rate in Nl/min for perfect gas shielded welding, max. inlet pressure: 20 bar, outlet pressure: 4.5 bar, fixed output: max. 3-34 Nl/min. Hydrogen adjustable. Inlet: G 3/8 LH U-nut according to DIN EN 560. Outlet: G 3/8 LH x 9mm nozzle according to DIN EN 560. Width x Height x Depth: 120 x 210 x 65 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541). Special outlet fitting: Standard: - hose nozzle G 3/8" LHk x 9mm. Options (surcharge): Order number: Gas purity/membrane. Outlet fitting 104906 for technical gases up to 4.5, with standard membrane. Hose nozzle G 3/8" LHk x 9mm. 104906-815 for technical gases up to 4.5, with standard membrane hose nozzle G3/8" LHk x 6mm 104906-814 for technical gases up to 4.5, with standard membrane external thread G3/8" LHk according to EN 560 104906-830 for technical gases up to 4.5, with standard membrane external thread G1/2" LHk according to EN 560 104906-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 104906-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 104906-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 104906-12M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 12mm 104906-2 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/8" 104906-4 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/4" 104906-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 104906-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 104906-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 104906-MM-830 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" LHk according to EN 560 104906-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 104906-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 104906-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 104906-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 104906-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 104906-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
5810 Tapping point pressure reducer Vulkan E10 F Flowmeter Hydrogen 3-34 Nl/min based on ISO 2503, Class 10, single-stage design, with flowmeter to control the exact flow rate in Nl/min for perfect gas shielded welding, max. inlet pressure: 20 bar, outlet pressure: 4.5 bar, fixed output: max. 3-34 Nl/min. Hydrogen adjustable. Inlet: G 3/8 LH U-nut according to DIN EN 560. Outlet: G 3/8 LH x 9mm nozzle according to DIN EN 560. Width x Height x Depth: 120 x 210 x 65 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541). Special outlet fitting: Standard: - hose nozzle G 3/8" LHk x 9mm. Options (surcharge): Order number: Gas purity/membrane. Outlet fitting 104906 for technical gases up to 4.5, with standard membrane. Hose nozzle G 3/8" LHk x 9mm. 104906-815 for technical gases up to 4.5, with standard membrane hose nozzle G3/8" LHk x 6mm 104906-814 for technical gases up to 4.5, with standard membrane external thread G3/8" LHk according to EN 560 104906-830 for technical gases up to 4.5, with standard membrane external thread G1/2" LHk according to EN 560 104906-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 104906-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 104906-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 104906-12M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 12mm 104906-2 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/8" 104906-4 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/4" 104906-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 104906-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 104906-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 104906-MM-830 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" LHk according to EN 560 104906-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 104906-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 104906-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 104906-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 104906-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 104906-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
5811 Tapping point pressure reducer Vulkan E10 F Flowmeter Hydrogen 3-34 Nl/min based on ISO 2503, Class 10, single-stage design, with flowmeter to control the exact flow rate in Nl/min for perfect gas shielded welding, max. inlet pressure: 20 bar, outlet pressure: 4.5 bar, fixed output: max. 3-34 Nl/min. Hydrogen adjustable. Inlet: G 3/8 LH U-nut according to DIN EN 560. Outlet: G 3/8 LH x 9mm nozzle according to DIN EN 560. Width x Height x Depth: 120 x 210 x 65 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541). Special outlet fitting: Standard: - hose nozzle G 3/8" LHk x 9mm. Options (surcharge): Order number: Gas purity/membrane. Outlet fitting 104906 for technical gases up to 4.5, with standard membrane. Hose nozzle G 3/8" LHk x 9mm. 104906-815 for technical gases up to 4.5, with standard membrane hose nozzle G3/8" LHk x 6mm 104906-814 for technical gases up to 4.5, with standard membrane external thread G3/8" LHk according to EN 560 104906-830 for technical gases up to 4.5, with standard membrane external thread G1/2" LHk according to EN 560 104906-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 104906-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 104906-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 104906-12M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 12mm 104906-2 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/8" 104906-4 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/4" 104906-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 104906-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 104906-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 104906-MM-830 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" LHk according to EN 560 104906-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 104906-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 104906-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 104906-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 104906-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 104906-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
5812 Tapping point pressure reducer Vulkan E10 F Flowmeter Hydrogen 3-34 Nl/min based on ISO 2503, Class 10, single-stage design, with flowmeter to control the exact flow rate in Nl/min for perfect gas shielded welding, max. inlet pressure: 20 bar, outlet pressure: 4.5 bar, fixed output: max. 3-34 Nl/min. Hydrogen adjustable. Inlet: G 3/8 LH U-nut according to DIN EN 560. Outlet: G 3/8 LH x 9mm nozzle according to DIN EN 560. Width x Height x Depth: 120 x 210 x 65 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541). Special outlet fitting: Standard: - hose nozzle G 3/8" LHk x 9mm. Options (surcharge): Order number: Gas purity/membrane. Outlet fitting 104906 for technical gases up to 4.5, with standard membrane. Hose nozzle G 3/8" LHk x 9mm. 104906-815 for technical gases up to 4.5, with standard membrane hose nozzle G3/8" LHk x 6mm 104906-814 for technical gases up to 4.5, with standard membrane external thread G3/8" LHk according to EN 560 104906-830 for technical gases up to 4.5, with standard membrane external thread G1/2" LHk according to EN 560 104906-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 104906-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 104906-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 104906-12M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 12mm 104906-2 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/8" 104906-4 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/4" 104906-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 104906-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 104906-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 104906-MM-830 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" LHk according to EN 560 104906-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 104906-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 104906-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 104906-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 104906-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 104906-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
5813 Tapping point pressure reducer Vulkan E10 F Flowmeter Hydrogen 3-34 Nl/min based on ISO 2503, Class 10, single-stage design, with flowmeter to control the exact flow rate in Nl/min for perfect gas shielded welding, max. inlet pressure: 20 bar, outlet pressure: 4.5 bar, fixed output: max. 3-34 Nl/min. Hydrogen adjustable. Inlet: G 3/8 LH U-nut according to DIN EN 560. Outlet: G 3/8 LH x 9mm nozzle according to DIN EN 560. Width x Height x Depth: 120 x 210 x 65 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541). Special outlet fitting: Standard: - hose nozzle G 3/8" LHk x 9mm. Options (surcharge): Order number: Gas purity/membrane. Outlet fitting 104906 for technical gases up to 4.5, with standard membrane. Hose nozzle G 3/8" LHk x 9mm. 104906-815 for technical gases up to 4.5, with standard membrane hose nozzle G3/8" LHk x 6mm 104906-814 for technical gases up to 4.5, with standard membrane external thread G3/8" LHk according to EN 560 104906-830 for technical gases up to 4.5, with standard membrane external thread G1/2" LHk according to EN 560 104906-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 104906-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 104906-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 104906-12M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 12mm 104906-2 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/8" 104906-4 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/4" 104906-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 104906-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 104906-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 104906-MM-830 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" LHk according to EN 560 104906-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 104906-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 104906-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 104906-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 104906-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 104906-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
5814 Tapping point pressure reducer Vulkan E10 F Flowmeter Hydrogen 3-34 Nl/min based on ISO 2503, Class 10, single-stage design, with flowmeter to control the exact flow rate in Nl/min for perfect gas shielded welding, max. inlet pressure: 20 bar, outlet pressure: 4.5 bar, fixed output: max. 3-34 Nl/min. Hydrogen adjustable. Inlet: G 3/8 LH U-nut according to DIN EN 560. Outlet: G 3/8 LH x 9mm nozzle according to DIN EN 560. Width x Height x Depth: 120 x 210 x 65 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541). Special outlet fitting: Standard: - hose nozzle G 3/8" LHk x 9mm. Options (surcharge): Order number: Gas purity/membrane. Outlet fitting 104906 for technical gases up to 4.5, with standard membrane. Hose nozzle G 3/8" LHk x 9mm. 104906-815 for technical gases up to 4.5, with standard membrane hose nozzle G3/8" LHk x 6mm 104906-814 for technical gases up to 4.5, with standard membrane external thread G3/8" LHk according to EN 560 104906-830 for technical gases up to 4.5, with standard membrane external thread G1/2" LHk according to EN 560 104906-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 104906-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 104906-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 104906-12M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 12mm 104906-2 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/8" 104906-4 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/4" 104906-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 104906-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 104906-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 104906-MM-830 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" LHk according to EN 560 104906-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 104906-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 104906-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 104906-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 104906-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 104906-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
5815 Tapping point pressure reducer Vulkan E10 F Flowmeter Hydrogen 3-34 Nl/min based on ISO 2503, Class 10, single-stage design, with flowmeter to control the exact flow rate in Nl/min for perfect gas shielded welding, max. inlet pressure: 20 bar, outlet pressure: 4.5 bar, fixed output: max. 3-34 Nl/min. Hydrogen adjustable. Inlet: G 3/8 LH U-nut according to DIN EN 560. Outlet: G 3/8 LH x 9mm nozzle according to DIN EN 560. Width x Height x Depth: 120 x 210 x 65 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541). Special outlet fitting: Standard: - hose nozzle G 3/8" LHk x 9mm. Options (surcharge): Order number: Gas purity/membrane. Outlet fitting 104906 for technical gases up to 4.5, with standard membrane. Hose nozzle G 3/8" LHk x 9mm. 104906-815 for technical gases up to 4.5, with standard membrane hose nozzle G3/8" LHk x 6mm 104906-814 for technical gases up to 4.5, with standard membrane external thread G3/8" LHk according to EN 560 104906-830 for technical gases up to 4.5, with standard membrane external thread G1/2" LHk according to EN 560 104906-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 104906-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 104906-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 104906-12M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 12mm 104906-2 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/8" 104906-4 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/4" 104906-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 104906-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 104906-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 104906-MM-830 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" LHk according to EN 560 104906-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 104906-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 104906-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 104906-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 104906-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 104906-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
5816 Tapping point pressure reducer Vulkan E10 F Flowmeter Hydrogen 3-34 Nl/min based on ISO 2503, Class 10, single-stage design, with flowmeter to control the exact flow rate in Nl/min for perfect gas shielded welding, max. inlet pressure: 20 bar, outlet pressure: 4.5 bar, fixed output: max. 3-34 Nl/min. Hydrogen adjustable. Inlet: G 3/8 LH U-nut according to DIN EN 560. Outlet: G 3/8 LH x 9mm nozzle according to DIN EN 560. Width x Height x Depth: 120 x 210 x 65 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541). Special outlet fitting: Standard: - hose nozzle G 3/8" LHk x 9mm. Options (surcharge): Order number: Gas purity/membrane. Outlet fitting 104906 for technical gases up to 4.5, with standard membrane. Hose nozzle G 3/8" LHk x 9mm. 104906-815 for technical gases up to 4.5, with standard membrane hose nozzle G3/8" LHk x 6mm 104906-814 for technical gases up to 4.5, with standard membrane external thread G3/8" LHk according to EN 560 104906-830 for technical gases up to 4.5, with standard membrane external thread G1/2" LHk according to EN 560 104906-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 104906-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 104906-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 104906-12M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 12mm 104906-2 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/8" 104906-4 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/4" 104906-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 104906-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 104906-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 104906-MM-830 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" LHk according to EN 560 104906-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 104906-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 104906-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 104906-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 104906-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 104906-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
5820 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
5821 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
5822 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
5823 Pressure reducer Vulkan LHR 300/270 inert gas DIN 477-5, 10 - 270 bar BSP according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 270 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5. Outlet: G 1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 400 / 300 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 306711 G1/2RHak according to EN 560 306711-800 External thread G1/4" RHk according to EN560 306711-870 External thread G3/8" RHk according to EN 560 306711-6M Compression fitting VA 6mm 306711-8M Compression fitting VA 8mm 306711-10M Compression fitting VA 10mm 306711-12M Compression fitting VA 12mm 306711-15M Compression fitting VA 15mm 306711-18M compression fitting VA 18mm
12876 Tapping point regulator Vulkan TecLine E10, single stage. Brass body, Perbunan diaphragm and seals. Gas purity up to 4.5. Safety gauges acc. to DIN EN ISO 5171. Inlet pressure max 20 bar. Outlet pressure 0–10 bar (adjustable). Max. flow 46 Nm³/h at 10 bar back pressure. Inlet: G 3/8 RH (right-hand) nut acc. to EN 560. Outlet: G 1/4 RH x 6 mm hose nozzle. LP gauge: 0–16 bar. Dimensions: 120 × 160 × 65 mm, weight 1.0 kg.
12896 Tapping point regulator Vulkan TecLine E10F, single stage with integrated flowmeter for precise flow control. Brass body, Perbunan diaphragm and seals, acc. to ISO 2503 Class 10. Inlet pressure max 20 bar. Outlet pressure 4.5 bar (fixed). Flowmeter range 0.5–5.0 Nl/min (adjustable). Inlet: G 3/8 RH (right-hand) nut acc. to EN 560. Outlet: G 1/4 RH x 6 mm hose nozzle. Dimensions: 120 × 210 × 65 mm, weight 1.0 kg.
12900 Tapping point regulator Vulkan TecLine E20, single stage. Brass body, EPDM/PTFE diaphragm, EPDM seals. Gas purity up to 4.5. Safety gauges acc. to DIN EN ISO 5171. Inlet pressure max 40 bar. Outlet pressure 0–20 bar (adjustable). Max. flow 75 Nm³/h at 20 bar back pressure. Inlet: G 1/2 RH (right-hand) nut acc. to EN 560. Outlet: G 1/2 RH x 9 mm hose nozzle. LP gauge: 0–25 bar. Dimensions: 180 × 225 × 75 mm, weight 1.7 kg.
12909 Tapping point regulator Vulkan TecLine E40, single stage. Brass body, PTFE diaphragm (stainless steel for oxygen), PTFE seals. Gas purity up to 4.5. Safety gauges acc. to DIN EN ISO 5171. Inlet pressure max 60 bar. Outlet pressure 0–40 bar (adjustable). Max. flow 120 Nm³/h at 40 bar back pressure. Inlet: G 1/2 RH (right-hand) nut acc. to EN 560. Outlet: G 1/2 RH x 9 mm hose nozzle. Dimensions: 180 × 225 × 75 mm, weight 1.7 kg.
12916 Ribbed tapping point regulator Vulkan TecLine ER20, single stage. Brass body, stainless steel diaphragm, PTFE seals. Gas purity up to 4.5. Safety gauges acc. to DIN EN ISO 5171. Inlet pressure max 100 bar. Outlet pressure 0–20 bar (adjustable). Inlet: G 1/2 RH (right-hand) nut acc. to EN 560. Outlet: G 1/2 RH x 9 mm hose nozzle. Dimensions: 180 × 225 × 75 mm, weight 1.7 kg.
12921 Ribbed tapping point regulator Vulkan TecLine ER40, single stage. Brass body, stainless steel diaphragm, PTFE seals. Gas purity up to 4.5. Safety gauges acc. to DIN EN ISO 5171. Inlet pressure max 100 bar. Outlet pressure 15–40 bar (adjustable). Inlet: G 1/2 RH (right-hand) nut acc. to EN 560. Outlet: G 1/2 RH x 9 mm hose nozzle. Dimensions: 180 × 225 × 75 mm, weight 1.7 kg.